Call Now: (703) 753-7446

Shop

  •

    MP2H Gasoline Engine

    Multiquip's Masonry Pro Saw MP2 Series saws are designed for the most challenging industrial grade jobs where high productivity is required. All saws are mounted to a rugged reinforced steel frame with an integrated foot pedal control for precise, safe cutting. Forklift pockets permit easy transport.
    • Powerful HONDA 8.5HP GX270 Gasoline Engine w/Cyclone Air Filter
    • Rigid steel frame construction minimizes vibration and assures accurate cutting
    • Stay-level blade guard for operator safety
    • Accurate screw thread and foot pedal control provides precise blade orientation and operator comfort
    • Fork lift pockets for easy transportation
    • High volume mechanical water pump for maximum blade cooling
    • Open back design permits handling larger materials
    • Cutting jig included
    • Sturdy aluminum conveyor cart for maximum stability and easy travel​
    Details

  • MP401 Metal Professional Measuring Wheel

    Keson's MP401. Our best-selling metal wheel. The 4-foot circumference wheel levels out uneven ground by spanning divets that smaller wheels would dip into. The wheel’s size enables it to roll and register feet clicks at the best pace in the industry. LIMITED LIFETIME WARRANTY. Made in the USA.
    Details

  • MTX60HD rammer

    MTX60HD Honda GX100 Engine, 3,060 lb impact force, 10.4 in shoe
    For applications requiring even greater productivity, Multiquip's Mikasa MTX60HD 4-cycle rammer is the answer. Now with a redesigned fuel-tank that meets new EPA standards and features an integrated tachometer/hour meter.
    MTX-Series rammers are renowned for performance and ease of operation. The MTX-Series includes the features most preferred by contractors such as:
    • Cyclonic air cleaners that capture 98% of airborne dust particles
    • Long-lasting laminated wood and steel shoe
    • Low vibration handles for operator comfort
    • Combination hour meter/tachometer
    • Durable guards to protect the engine from damage
    • Redesigned fuel tank to meet EPA standards for evaporative emmissions
    Details

  • Mudtub

    The Multiquip MUD TUB is the easy choice for supplying mortar to professional masons. It is engineered for durability & easy cleanup with two available models to meet your job requirements.
    • Capacity 10 cubic foot (28.m3)
    • Highly durable polyethylene construction resistant to cold weather and UV
    • Our tough Easy Clean tubs can be cleaned in minutes with tap of rubber mallet
    • Resist dents, rust or cracks
    • Mud Tub features 4" x 4" rectangular steel feet
    • One year warranty
    • Approximate 1,000 pound (453 kg) capacity
    Details

  • Multiquip Pro12 Essick Stationary Mortar Mixer

    For almost 90 years MQ Essick plaster / mortar mixers have set the standard for innovation and durability. The 12 cubic foot capacity PRO12 series increases contractor productivity in applications using on-site silo dispensing systems. The PRO12 uses a powerful hydraulic drive to power through the toughest mix designs. A unique over-center dump design easily discharges material into large mud tubs with minimal operator fatigue.
    • Reduced fatigue by enabling operator to load at waist level. Ergonomically designed to load low and dump high.
    • Adapt to any job site, while maintaining a compact footprint, with 130° swing-away stabilizers.
    • Extra thick 1/4" steel drum wrap with 3/8" ends resists wear and dents.
    • Adjustable height - discharge height 24" ~ 42.5".
    • Easily fits in a standard pickup truck bed with its compact design with inboard hydraulic motor.
    • Extended run times - up to 8 hours – with 5-gallon fuel tank.
    • Costly waste is reduced by a spill plate that directs excess material into the tub.
    • Tackle stiff mix designs, and handle up to 1-inch aggregate, with a powerful hydraulic drive.
    • Convenient access forklift pockets from any side of the mixer.
    • Drive and dump controls easily accessible and located above the engine cowling.
    • Greasable paddle shaft seal provides long service life.
    Details

  • MVC88VTHW Plate Compactor

    MVC88VTHW 3,372 cf, Honda GX160, 19.7 in. plate
    Our best selling plate just got better! The new MVC88 now features a single cast baseplate and eccentric housing to enhance plate durability, serviceability and performance.  An hour/tachometer to help measure runtime and engine rpm is now a standard feature.  The plate is even easier to transport with the new wheel kit design.  All this combined with an advanced anti-vibration handle make the MVC88 the newest and most technically advanced plate compactors on the market.
    • Reliable engine with Honda GX160 offering easy start-up and low oil shutdown for durability.
    • Cyclonic pre-cleaner captures most airborne contaminants for engine protection and extended service life.
    • Single cast baseplate and eccentric housing lowers center of gravity and increases travel speed by 12% for greater productivity.
    • Hour/tachometer measures runtime and engine rpm.
    • Tubular steel roll bar protects engine components and provides central lifting point.
    • Sealed belt cover keeps dirt and rocks out extending belt life.
    • Open base plate design makes for easier removal of dirt and rock build-up.
    • Cog-tooth belt drive enables longer life compared to conventional V-belts.
    • Removable water tank can easily be refilled and is largest in class with 13.7 quart capacity.
    • Optional urethane plate attachment for use on paving stones and brick pavers (UPA88T).
    • Optional transport wheel kit WHL88T for serial number T2A9197 and below.  WHL88TC for serial number T2A9198 and above. VIEW ALL MODELS
    Details

  • NEYRA Thermoflex – Crack Joint Thermo-sealant

    • 30lb block
    • Direct Fire Formula: Tolerates reheating and will not jell in kettle.
    • No Tracking: A tough and pliable formula for parking lots & driveways.
    • No Bleed Through: Ideal for crackfilling under sealcoating, slurry seals and overlays.
    • Sets Firm & Fast: You can seal in 15 minutes or less.
    • Resilient: Formulated to perform under the expansion and contraction conditions of all climates.
    • Proven Performance: Meets and exceeds the standards of AASHTO M173 and ASTM D6690 Type I.
    Heating: Thermoflex should be heated in a vessel designed for heating hot pour crack sealants. Some means of agitation and monitoring of temperature are recommended. The range of safe heating temperature for the product is between 350-400° F. Overheating Thermoflex beyond this recommended range can degrade the material and create a fire hazard. Thermoflex is suitable for use in a direct fire melter or an oil-jacketed double boiler. It is also an excellent product for use through pumping type kettles. Application: Install heated sealant directly into cracks/joints not to exceed a 4-inch-wide band. Thickness should be controlled to not more than 1/8 inch above pavement surface. Finished sealed cracks and joints will be uniformly level. Refill to achieve a flush to 1/8-inch concave surface appearance. One lb. of Thermoflex will fill the following lineal feet: Product Data Sheet
    Details

  • Nightstick Dual-Light Flashlight w/ Dual Magnets

    • LED technology Flashlight/Floodlight/Dual-Light™
    • Momentary or constant-on flashlight
    • Sharp focused flashlight beam for distance illumination
    • High-efficiency deep parabolic reflector
    • Effective beam distance of 181 meters (over 593 feet)
    • Unfocused wide-beam floodlight for close-up illumination
    • Dual-Light (flashlight & floodlight on at the same time) for maximum versatility
    • Powerful integrated magnets built into the base and pocket clip for multiple hands-free options
    • Engineered polymer housing, Non-slip grip
    • IP-X7 Waterproof
    • Impact & chemical resistant
    • Built-in pocket/belt clip, Includes removable lanyard
    • 3 AA batteries (included)
    • 1 Year Limited Warranty
    Details

  • Nightstick Low-Profile Dual-Light Headlamp

    • LED technology
    • Focused high/low-brightness spotlight beam for distance illumination
    • Unfocused high/low-brightness wide-beam floodlight for close-up illumination
    • Dual-Light™ (spotlight and floodlight at same time) for maximum versatility
    • Glass-filled nylon polymer housing
    • Dual switches located on front of light
    • Adjustable tilt head
    • Battery pack located in the rear of the strap
    • Amber colored rear facing led
    • Heavy-duty rubber strap for fire helmets and hard hat applications
    • IP-X7 Waterproof
    • Impact & chemical resistant
    • Meets requirement for NFPA-1971-8.6 (2013)
    • 3 AA batteries (included)
    • Limited Lifetime Warranty
    Details

  • NOISE CONTROL HEARING PROTECTION

    Our noise control hearing protection passively blocks noise by relying on the insulating materials of the ear cups to dampen sound. The dielectric construction makes them safe for all environments including electrical applications. Comfortable cups and low pressure make them comfortable for all-day wear.
    • 25DB Passive Noise Reduction Rating.
    • Spring design offers low pressure and a high level of comfort.
    • Three distinct wearing positions for ease of use.
    • Excellent grip makes it easy to adjust the cups, even when wearing gloves.
    • Provides maximum space for the ears inside the cup.
    • Soft ear cup material allows extended wear without discomfort.
    • Easy ear cup height adjustment.
    • Retain the Class E dielectric rating on the RADIX Non-Vented and BRIGGS Non-Vented.
    • Universal slot design, our hearing proteciotn will fit any hard hat or safety helmet with slotted attachment points.
    • Markets: Construction, General Industry, Oil & Gas, Utilities.
    DESIGN TO FIT OUR BRIGGS, RADIX AND DAX HARD HATS*
    Details

  • Object Markers

    Type 1, 2, and 3 object markers are used to mark obstructions within or adjacent to the roadway. Type 4 object markers are used to mark the end of a roadway.

    Type 1—a diamond-shaped sign, at least 18 inches on a side, consisting of either a yellow (OM1-1) or black (OM1-2) sign with nine yellow retroreflective devices, each with a minimum diameter of 3 inches, mounted symmetrically on the sign, or an all-yellow retroreflective sign (OM1-3).

    Type 2—either a marker (OM2-1V or OM2-1H) consisting of three yellow retroreflective devices, each with a minimum diameter of 3 inches, arranged either horizontally or vertically on a white sign measuring at least 6 x 12 inches; or an all-yellow horizontal or vertical retroreflective sign (OM2-2V or OM2-2H), measuring at least 6 x 12 inches.

    Type 3—a striped marker, 12 x 36 inches, consisting of a vertical rectangle with alternating black and retroreflective yellow stripes sloping downward at an angle of 45 degrees toward the side of the obstruction on which traffic is to pass. The minimum width of the yellow and black stripes shall be 3 inches.

    Type 4—a diamond-shaped sign, at least 18 inches on a side, consisting of either a red (OM4-1) or black (OM4-2) sign with nine red retroreflective devices, each with a minimum diameter of 3 inches, mounted symmetrically on the sign, or an all-red retroreflective sign (OM4-3).

    Details

  • Occunomix High Visibility Mesh Hard Hat Shade OK-5057009

    • Fits regular and full brim hard hats
    • Provides airflow, shade and visibility
    • 5/8” Silver beaded reflective tape
    • Extra fabric length allows wearer to tuck mesh fabric inside of shirt collar
    • One size fits most
    Details

About Us

Meet the Team

Products

Services

Rentals

Contact Us

Return Policy

Privacy Policy

Join Our Email List

Gainesville Branch

14490 Lee Hwy
Gainesville, VA 20155
(703) 753-7446

Tidewater Branch

4815 George Washington Memorial Hwy
Yorktown, VA 23692
(757) 879-6899

Fishersville Branch

24 Lucas Road
Fishersville, VA 22939
(540) 688-3327

Lorton Branch

8433A Backlick Rd
Lorton, VA 22079
(703) 339-0909

Capitol Heights Branch

9011 East Hampton Dr
Capitol Heights, MD 20743
(301) 395-5161

Baltimore Branch

8515 A Kelso Drive
Essex, MD 21221
(443) 233-6955

Copyright © Traffic Safety Supplies, Inc. Web design by Nashville web design company, All My Web Needs

Go to Top