- Protects 33in. square area
- Collapses to only 44in. square x 4in.H for easy storage
- Rail accommodates signs, flags or lights for safety
- Rail locks open and 2 hooking chains provide protected entry and exit
- Simple, one-pc. construction
- No-tool assembly
-
-
4"X5" Flag with 21" Stake , 100/Bundle MULTIPEL COLORS IN STOCK: Blue, Green, Lime, Orange, Pink, Red, White, Yellow. -
A handheld, rolling inverted marking paint applicator, 32" long- Handle fits large or small hands comfortably
- Wheel has a rubber over mold to reduce vibration over different surfaces
- Flag holder
- Flag insert spike. Simply remove the wheel and insert the spike for quick flag placement
-
Keson RRPA18 Measuring Wheel with Paint Applicator -
- Protects your neck and keeps you cool from the sun while wearing your hard hat.
- Promotes comfort and endures safety in high heat conditions.
- Provides extended cooling comfort and heat stress prevention.
- Self-adhesive hook & loop tabs allow you to attach to the inside or outside of any hard hat.
- 2” wide high performance reflective material.
- Lightweight, durable and reusable.
- Activated by simply submerging in water.
- Cooling lasts for 5-10 hours & can be re-activated by re-submerging in water.
- Simple and easy to use.
-
- Promotes comfort and endures safety in high heat conditions.
- Provides extended cooling comfort and heat stress prevention.
- Elastic band to fit over most hard hats.
- 5/8” wide high performance reflective material with contrasting material.
- Lightweight, durable and reusable.
- Activated by simply submerging in water.
- Cooling lasts for 5-10 hours & can be re-activated by re-submerging in water.
- Simple and easy to use.
-
Class 3 #JS119 Lime- Durable ripstop material with waterproof seam sealed construction.
- Removable black quilted liner.
- Hidden collar hood.
- 2” wide 3M™ Scotchlite™ reflective material with 3” contrast.
- Brilliant Series reflective piping on collar, shoulders, hood and sleeve seams.
- Adjustable cuffs.
- Black bottom front & sleeves to keep a clean appearance.
- Left chest pocket with retractable clear ID holder.
- Left bicep 2-division pencil/pen pocket.
- Two outside lower slash pockets with zippers.
- Inside wallet pocket.
-
Class 3 #JS130 Lime- Durable ripstop material with waterproof seam sealed construction and fleece body & hood.
- Hood fits into the collar or can be removed altogether.
- Quilted sleeves for easy arm in and out access.
- 2” wide high performance reflective material.
- Adjustable cuffs with rubber pulls for easy use when wearing gloves.
- Left and right mic tabs.
- Right chest vertical pocket for wallet or other accessories.
- Left chest radio pocket.
- Left and right outside slash pockets.
- Left bicep 2-division pencil/pen pocket with drainage grommets.
- Large vertical tablet (iPad) pocket with zipper inside storm flap. Tablet can also be accessed without unzipping the jacket.
-
Class 3 #JS135 Lime- Durable ripstop material with waterproof seam sealed construction.
- 2” wide high performance reflective material laminated directly to the fabric for longer life.
- Zipper front closure with storm flap.
- Removable zip up hoodie sweatshirt.
- Black areas provide contrast, style, and durability.
- Detachable rain hood can be stored in pocket.
- Cuffs with durable rubber pull tabs make for easy adjustments while wearing gloves.
- Ventilated cape back for additional comfort.
- Reflective piping accents on back, sides, and pockets.
- Two outside lower gusseted pockets with hook & loop flaps.
- Two outside lower side access pockets with fleece lining.
- Left chest pocket with retractable clear ID holder.
- Left arm cell phone pocket with waterproof zipper.
- Inside lower left hidden tablet (iPad) pocket with zipper. Tablet pocket can be accessed without unzipping the jacket.
- Traditional hoodie design with two side slash pockets.
-
Class 3 #JS140 Lime- Durable ripstop material with waterproof seam sealed construction.
- Quilted liner with thermal insulation.
- 2” wide high performance reflective material.
- Zipper front closure with storm flap.
- Storm cuff (powder barrier) waist and sleeve liners keeps wind and snow out of critical areas.
- Black areas provide contrast, style, and durability.
- Detachable lined hood can be stored in pocket.
- Cuffs with durable rubber pull tabs make for easy adjustments while wearing gloves.
- Reflective piping accents on back, sides, and pockets.
- Two outside lower gusseted pockets with hook & loop flaps.
- Two outside lower side access pockets with microfleece lining.
- Left chest pocket with retractable clear ID holder.
- Left arm pencil pocket.
- Inside lower left hidden tablet (iPad) pocket with zipper. Tablet pocket can be accessed without unzipping the jacket.
-
Class 3 #JS142 Lime / #JS143 Orange- Made from high-quality heavyweight polyester sweatshirt material with black rib knit cuffing.
- Stay in sight with 2” wide breathable reflective material.
- Black accents on lower body and sleeves help hide dirt.
- Concealed reflective piping on front, back, sides, pockets and hood for better low light visibility.
- Hood is lined with soft jersey mesh for optimum comfort.
- Large kangaroo-style pocket keeps hands warm.
-
Class 3 #WB102Lime- Lightweight 100% polyester and flexible design.
- Durable black ripstop material in high wear areas, along the sides and under the arms.
- Waist cinches hidden in front pockets.
- Adjustable cuffs.
- Shoulder blade vents.
- 2” wide high-performance reflective material.
- Two outside lower pockets with zippers.
- Left chest vertical pocket with waterproof zipper.
-
Multiquip's Masonry Pro Saw MP2 Series saws are designed for the most challenging industrial grade jobs where high productivity is required. All saws are mounted to a rugged reinforced steel frame with an integrated foot pedal control for precise, safe cutting. Forklift pockets permit easy transport.- Powerful HONDA 8.5HP GX270 Gasoline Engine w/Cyclone Air Filter
- Rigid steel frame construction minimizes vibration and assures accurate cutting
- Stay-level blade guard for operator safety
- Accurate screw thread and foot pedal control provides precise blade orientation and operator comfort
- Fork lift pockets for easy transportation
- High volume mechanical water pump for maximum blade cooling
- Open back design permits handling larger materials
- Cutting jig included
- Sturdy aluminum conveyor cart for maximum stability and easy travel
-
Keson's MP401. Our best-selling metal wheel. The 4-foot circumference wheel levels out uneven ground by spanning divets that smaller wheels would dip into. The wheel’s size enables it to roll and register feet clicks at the best pace in the industry. LIMITED LIFETIME WARRANTY. Made in the USA. -
MTX60HD Honda GX100 Engine, 3,060 lb impact force, 10.4 in shoeFor applications requiring even greater productivity, Multiquip's Mikasa MTX60HD 4-cycle rammer is the answer. Now with a redesigned fuel-tank that meets new EPA standards and features an integrated tachometer/hour meter.MTX-Series rammers are renowned for performance and ease of operation. The MTX-Series includes the features most preferred by contractors such as:- Cyclonic air cleaners that capture 98% of airborne dust particles
- Long-lasting laminated wood and steel shoe
- Low vibration handles for operator comfort
- Combination hour meter/tachometer
- Durable guards to protect the engine from damage
- Redesigned fuel tank to meet EPA standards for evaporative emmissions
-
The Multiquip MUD TUB is the easy choice for supplying mortar to professional masons. It is engineered for durability & easy cleanup with two available models to meet your job requirements.- Capacity 10 cubic foot (28.m3)
- Highly durable polyethylene construction resistant to cold weather and UV
- Our tough Easy Clean tubs can be cleaned in minutes with tap of rubber mallet
- Resist dents, rust or cracks
- Mud Tub features 4" x 4" rectangular steel feet
- One year warranty
- Approximate 1,000 pound (453 kg) capacity
-
For almost 90 years MQ Essick plaster / mortar mixers have set the standard for innovation and durability. The 12 cubic foot capacity PRO12 series increases contractor productivity in applications using on-site silo dispensing systems. The PRO12 uses a powerful hydraulic drive to power through the toughest mix designs. A unique over-center dump design easily discharges material into large mud tubs with minimal operator fatigue.- Reduced fatigue by enabling operator to load at waist level. Ergonomically designed to load low and dump high.
- Adapt to any job site, while maintaining a compact footprint, with 130° swing-away stabilizers.
- Extra thick 1/4" steel drum wrap with 3/8" ends resists wear and dents.
- Adjustable height - discharge height 24" ~ 42.5".
- Easily fits in a standard pickup truck bed with its compact design with inboard hydraulic motor.
- Extended run times - up to 8 hours – with 5-gallon fuel tank.
- Costly waste is reduced by a spill plate that directs excess material into the tub.
- Tackle stiff mix designs, and handle up to 1-inch aggregate, with a powerful hydraulic drive.
- Convenient access forklift pockets from any side of the mixer.
- Drive and dump controls easily accessible and located above the engine cowling.
- Greasable paddle shaft seal provides long service life.
-
MVC88VTHW 3,372 cf, Honda GX160, 19.7 in. plateOur best selling plate just got better! The new MVC88 now features a single cast baseplate and eccentric housing to enhance plate durability, serviceability and performance. An hour/tachometer to help measure runtime and engine rpm is now a standard feature. The plate is even easier to transport with the new wheel kit design. All this combined with an advanced anti-vibration handle make the MVC88 the newest and most technically advanced plate compactors on the market.- Reliable engine with Honda GX160 offering easy start-up and low oil shutdown for durability.
- Cyclonic pre-cleaner captures most airborne contaminants for engine protection and extended service life.
- Single cast baseplate and eccentric housing lowers center of gravity and increases travel speed by 12% for greater productivity.
- Hour/tachometer measures runtime and engine rpm.
- Tubular steel roll bar protects engine components and provides central lifting point.
- Sealed belt cover keeps dirt and rocks out extending belt life.
- Open base plate design makes for easier removal of dirt and rock build-up.
- Cog-tooth belt drive enables longer life compared to conventional V-belts.
- Removable water tank can easily be refilled and is largest in class with 13.7 quart capacity.
- Optional urethane plate attachment for use on paving stones and brick pavers (UPA88T).
- Optional transport wheel kit WHL88T for serial number T2A9197 and below. WHL88TC for serial number T2A9198 and above. VIEW ALL MODELS
-
- 30lb block
- Direct Fire Formula: Tolerates reheating and will not jell in kettle.
- No Tracking: A tough and pliable formula for parking lots & driveways.
- No Bleed Through: Ideal for crackfilling under sealcoating, slurry seals and overlays.
- Sets Firm & Fast: You can seal in 15 minutes or less.
- Resilient: Formulated to perform under the expansion and contraction conditions of all climates.
- Proven Performance: Meets and exceeds the standards of AASHTO M173 and ASTM D6690 Type I.
-
- LED technology Flashlight/Floodlight/Dual-Light™
- Momentary or constant-on flashlight
- Sharp focused flashlight beam for distance illumination
- High-efficiency deep parabolic reflector
- Effective beam distance of 181 meters (over 593 feet)
- Unfocused wide-beam floodlight for close-up illumination
- Dual-Light (flashlight & floodlight on at the same time) for maximum versatility
- Powerful integrated magnets built into the base and pocket clip for multiple hands-free options
- Engineered polymer housing, Non-slip grip
- IP-X7 Waterproof
- Impact & chemical resistant
- Built-in pocket/belt clip, Includes removable lanyard
- 3 AA batteries (included)
- 1 Year Limited Warranty
-
- LED technology
- Focused high/low-brightness spotlight beam for distance illumination
- Unfocused high/low-brightness wide-beam floodlight for close-up illumination
- Dual-Light™ (spotlight and floodlight at same time) for maximum versatility
- Glass-filled nylon polymer housing
- Dual switches located on front of light
- Adjustable tilt head
- Battery pack located in the rear of the strap
- Amber colored rear facing led
- Heavy-duty rubber strap for fire helmets and hard hat applications
- IP-X7 Waterproof
- Impact & chemical resistant
- Meets requirement for NFPA-1971-8.6 (2013)
- 3 AA batteries (included)
- Limited Lifetime Warranty
-
Our noise control hearing protection passively blocks noise by relying on the insulating materials of the ear cups to dampen sound. The dielectric construction makes them safe for all environments including electrical applications. Comfortable cups and low pressure make them comfortable for all-day wear.- 25DB Passive Noise Reduction Rating.
- Spring design offers low pressure and a high level of comfort.
- Three distinct wearing positions for ease of use.
- Excellent grip makes it easy to adjust the cups, even when wearing gloves.
- Provides maximum space for the ears inside the cup.
- Soft ear cup material allows extended wear without discomfort.
- Easy ear cup height adjustment.
- Retain the Class E dielectric rating on the RADIX Non-Vented and BRIGGS Non-Vented.
- Universal slot design, our hearing proteciotn will fit any hard hat or safety helmet with slotted attachment points.
- Markets: Construction, General Industry, Oil & Gas, Utilities.
DESIGN TO FIT OUR BRIGGS, RADIX AND DAX HARD HATS* -
Type 1, 2, and 3 object markers are used to mark obstructions within or adjacent to the roadway. Type 4 object markers are used to mark the end of a roadway.Type 1—a diamond-shaped sign, at least 18 inches on a side, consisting of either a yellow (OM1-1) or black (OM1-2) sign with nine yellow retroreflective devices, each with a minimum diameter of 3 inches, mounted symmetrically on the sign, or an all-yellow retroreflective sign (OM1-3).
Type 2—either a marker (OM2-1V or OM2-1H) consisting of three yellow retroreflective devices, each with a minimum diameter of 3 inches, arranged either horizontally or vertically on a white sign measuring at least 6 x 12 inches; or an all-yellow horizontal or vertical retroreflective sign (OM2-2V or OM2-2H), measuring at least 6 x 12 inches.
Type 3—a striped marker, 12 x 36 inches, consisting of a vertical rectangle with alternating black and retroreflective yellow stripes sloping downward at an angle of 45 degrees toward the side of the obstruction on which traffic is to pass. The minimum width of the yellow and black stripes shall be 3 inches.
Type 4—a diamond-shaped sign, at least 18 inches on a side, consisting of either a red (OM4-1) or black (OM4-2) sign with nine red retroreflective devices, each with a minimum diameter of 3 inches, mounted symmetrically on the sign, or an all-red retroreflective sign (OM4-3).
-
- Fits regular and full brim hard hats
- Provides airflow, shade and visibility
- 5/8” Silver beaded reflective tape
- Extra fabric length allows wearer to tuck mesh fabric inside of shirt collar
- One size fits most
