Call Now: (703) 753-7446

Shop

  •

    Super Road LED Flare (Single)

    An advanced version of our standard LED flare.  It is slightly larger for double the light output and two rows of red LED lights.  It does not produce a flame, smoke, or harmful bi-products and does not require batteries!  Recharges so that it is ready for use when needed.
    • 24 super bright LEDs that are visible up to 2 miles
    • 7 flashing patterns including SOS Rescue (Morse Code)
    • Intrinsically safe design with a rubber-tight seal (not certified)
    • Powerful magnet to attach to metal surfaces
    • Waterproof, crush proof, and corrosion proof
    • Includes 120V Wall Charger, 12V Car Charger, USB Charger, & Storage Bag
    DOES NOT PRODUCE PERCHLORATE DOT & Traffic Safety Compliance
    1. U.S. DOT (FMCSA) 49 CFR 392.25 & 393.95 (g)
    2. MUTCD Type A (flashing) and Type C (solid on)
    3. NFPA 1901 Standards for Traffic Safety, Section 6.7.3 Miscellaneous Equipment.
    Applications: identify road hazards, signal for help, mark detours, underwater scuba or repair applications. Ideal for emergency responders. MADE IN USA US Patent #D654,387S and 8,550,653B2
    Details

  • Classic LED Red Road Flare, Battery Operated

    The Battery Operated LED Road Flare is an extremely durable, 18-LED flare that is a safe alternative to incendiary flares.
    • Crushproof
    • Waterproof and will float
    • 7 Flash patterns
    • Visible up to 1 mile
    • Magnet to attach to any magnetic surface
    • Requires 2 AA replaceable batteries (included)
    Made in USA Patent #D707,146 & 9,046,299 Uses:  May be used in any weather condition.  Ideal for road safety identification by emergency responders, personal vehicles, construction sites, or marine applications.
    Details

  • Type B Solar Light

    • Flash Rate: +/- 65 Times Per Minute 

    • Power/Energy: 1.5 Watt Solar Panel/3.6 Volt 4600 mAh Battery Included/Installed

    • Illumination/Brightness: 9 High Intensity Super Bright LEDs; 35+ Candelas

    • Operational Requirements: Ready to Operate Right Out of the Box; All Parts Included; Maintenance Free

    • Length of Operation: 3+ Years

    • Full Solar Charge: Operates 168+ Hours Flashing

    • Overcharge: Protection Built-In

    • Charging Requirements: Re-Charges During Day; No Direct Sunlight Required to Charge 

    • On/Off Switch: Operates 24/7 Flashing

    • Lens Cover Material: Polycarbonate 

    • Mounting System: Box Style Base with Multiple Mounting Options Available

    • Packaging/Parts Included: 5 Lights Per Box (Fully Assembled); 5 Bolts; 5 Post U-Clamps; 5 Hoods; 1 Security Tool; 1 On/Off Push Pin

    • Colors Available: Amber/Yellow (In Stock); Red

    • Download Product Spec

    This product has multiple variants. The options may be chosen on the product page Details

  • TYPE-A/C DUAL FUNCTION SOLAR POWERED BARRICADE LIGHTS

    PRODUCT SPECIFICATIONS Product: Type-A/C Dual Function Solar Powered Barricade Light Product Type: Traffic Safety Light Product #: DF002
    • Dual Function Mode: Flashing &/or Steady Burn Modes All-in-One
    • Flash Rate: +/- 65 Times Per Minute
    • Power/Energy: 0.4 Watt Solar Panel/2.4 Volt NiMH Rechargeable 1,600 mAh Battery Included/Installed
    • Illumination/Brightness: 2 High-Intensity Super Bright LEDs; 9 Candelas Each
    • Length of Operation: 3 to 5+ Years
    • Lens Cover: 7" Polycarbonate Lens with Retro-Reflector Ring
    • Mounting System: 180 Degree Swivel Box Base; Universal Mounting Bracket & Tool
    • Full Solar Charge: Operates 336+ Hours (Flash Mode); 168+ Hours (Steady Mode)
    • Charging Requirements: Re-Charges During Day; No Direct Sunlight Required to Charge
    • On/Off Switch: Light Automatically Turns On at Dusk & Off at Dawn
    • Packaging/Parts Included: 5 Lights Per Box (Fully Assembled); 5 Security Bolts; 1 Security Tool; 1 On/Off Push Pin
    • Colors Available: Amber/Yellow; Red;
    Light Meets or Exceeds MUTCD Requirements and ITE Specifications; NCHRP-350 Certified Download Product Specs
    This product has multiple variants. The options may be chosen on the product page Details

  • 360 Degree Type-D Solar Powered Box Base Barricade Lights

    Box Style Base

    Product Highlights: 

    • FAA Advisory Circular No. 150/5370-2G Compliant

    • Meets the "Buy-American" Provisions of the 2009 ARRA

    • Dual Function Light with Flash or Steady Burn All-In-One

    • Standard Box Style Base with Security Bolt Included

    • Premium Components and Durable Polycarbonate Exterior 

    • No Maintenance or Purchase of Batteries Necessary/All Parts Included

    • No Direct Sunlight Required to Power Unit

    • Ready to Operate Right Out of the Box

    Details

  • 360 Degree Type-D Solar Powered Screw/Threaded Base Barricade Lights

    Screw/Threaded Style Base

    Product Highlights: 

    • FAA Advisory Circular No. 150/5370-2G Compliant

    • Meets the "Buy-American" Provisions of the 2009 ARRA

    • Dual Function Light with Flash or Steady Burn All-In-One

    • Standard Size Threaded/Screw-In Base

    • Premium Components and Durable Polycarbonate Exterior 

    • No Maintenance or Purchase of Batteries Necessary/All Parts Included

    • No Direct Sunlight Required to Power Unit

    • Ready to Operate Right Out of the Box

    Details

  • Smart Cushion® Crash Attenuator

    Click here for Attenuator Brochure 
    • Fully re-directive, non-gating, bidirectional, impact attenuator
    • Designed to be reset after an impact in under 30 minutes
    • Low angle exit on side impacts keep vehicles from rebounding back into traffic.
    • Life cycle cost savings with minimum replacement parts needed
    • MASH eligible
    MASH Test Results:
    • All MASH tests were performed including the optional midsize car test using an independent accredited testing facility. Once again, the Smart Cushion established records for ridedown g-forces for small vehicles just like it did with NCHRP350.
    • The SCI100GM is a MASH and NCHRP350 Test Level 3 attenuator.
    Safety Benefits:
    • Variable resistance (speed-dependent), not fixed resistance, provides consistent deceleration during ridedown.
    • Longer ridedown distances and lower sustained g-forces for lighter or slower-moving vehicles.
    • Quick and easy resets for reduced worker exposure to traffic.
    • Low angle of exit on side impacts to keep vehicle from rebounding back into traffic.
    • No mobilization required after side impacts reduces public and worker exposure.
    Cost Benefits:
    • Few replacement parts requirements virtually eliminate spare parts inventory and parts costs.
    • Thirty minute resets reduces labor and traffic control costs.
    • The reverse-tapered design eliminates side panel stress on frontal impacts to reduce damage and system fatigue from multiple impacts.
    • Life cycle cost savings increase dramatically as additional impacts occur.
    • No damage on side impact combined with low cost on frontal impacts can save you 75% or more on costs including labor, mobilization and parts
    • Systems shipped from factory fully assembled reduce on-site labor.
    Details

  • CrashGard® Sand Barrel System

    CrashGard® Sand Barrel System is a non-redirective, gating sand barrel, or crash cushion. The system consists of 3 MASH-compliant components: barrel, lid and insert. CrashGard protects drivers from fixed objects like concrete barriers, bridge abutments, and lighting fixtures. Features and Benefits:
    • One CrashGard Sand Barrel accommodates all weight requirements (200, 400, 700, 1400, and 2100 pounds). Install Insert for 200, 400, 700, and 1,400 lbs. No Insert required for 2,100 lbs.
    • Blow-molded from high molecular, high density polyethylene plastic (HLMI/HDPE) that produces a stronger sand barrel.
    • UV stabilizers maximize product life. Color-stable pigments resist fading.
    • Designed for easy transport: squared bottom accepts forklifts, tiered top accepts CrashGard Hoist.
    •  Barrels nest easily for convenient storage.
     
    Details

  • 7509 Tripod Kit

    • Two head mounted pulleys
    • Adjustable to 55" to 91" working height, with 6" adjustments
    • 60' Retrieval SRL w/ galvanized cable
    • Includes 7297 60' Personnel Winch with 3/16" galvanized steel cable
    • Includes storage bags
    Details

  • Air Ventilation Blower

    Designed with flexibility in mind, every feature of the EP8AC25P BLOW-R-PAC®, Ventilation Blower complete with 8 inch diameter x 25 foot flexible duct and integral storage canister. is designed to meet the confined space ventilation demands for many construction, utility, and municipal applications. Straight thru, axial flow design maximizes air flow delivery rates with input horsepower. Sturdy, easy-grip handle molded directly into the housing makes for convenient, reliable transport. The tough, double-walled housing is molded from UV-resistant polyethylene, making it dent-resistant, corrosion-proof and virtually indestructible. Air flows rates are certified by an independent testing agency. Specifications: POWER SOURCE Electric Motor: 1/3HP, 115 VAC, 60HZ, single speed Speed Control: Single Speed BLOWER Type: Axial Material: High density, UV resistant polyethylene Size: 8 inch (203 mm) Nominal Diam. inlet/ Outlet and 25 foot flexible duct with integral storage canister GENERAL Material: High density, UV resistant polyethylene Weight: 59 lbs (26.76 kg) DIMENSIONS Height: 15 inch (381 mm) Length: 33.5 inch (850.9 mm) Width: 13.5 inch (342.9 mm) FLOW RATES Free Air: 902.35 CFM (25.55 cmm) One 90 Degree Bend: 547.63 CFM (15.51 cmm) Two: 90 Degree Bends: 477.30 CFM (13.52 cmm)
    Details

  • GasAlertMax XT II 4-Gas Detector

    GasAlertMax XT II 4-Gas Detector w/ Pump, Comburstible, O2, H2S, and CO, Yellow
    Details

  • Manhole Guard Rail

    • Protects 33in. square area
    • Collapses to only 44in. square x 4in.H for easy storage
    • Rail accommodates signs, flags or lights for safety
    • Rail locks open and 2 hooking chains provide protected entry and exit
    • Simple, one-pc. construction
    • No-tool assembly
    Details

About Us

Meet the Team

Products

Services

Rentals

Contact Us

Return Policy

Privacy Policy

Join Our Email List

Gainesville Branch

14490 Lee Hwy
Gainesville, VA 20155
(703) 753-7446

Tidewater Branch

4815 George Washington Memorial Hwy
Yorktown, VA 23692
(757) 879-6899

Fishersville Branch

24 Lucas Road
Fishersville, VA 22939
(540) 688-3327

Lorton Branch

8433A Backlick Rd
Lorton, VA 22079
(703) 339-0909

Capitol Heights Branch

9011 East Hampton Dr
Capitol Heights, MD 20743
(301) 395-5161

Baltimore Branch

8515 A Kelso Drive
Essex, MD 21221
(443) 233-6955

Copyright © Traffic Safety Supplies, Inc. Web design by Nashville web design company, All My Web Needs

Go to Top