- Crushproof
- Waterproof and will float
- 7 Flash patterns
- Visible up to 1 mile
- Magnet to attach to any magnetic surface
- Requires 2 AA replaceable batteries (included)
-
The Battery Operated LED Road Flare is an extremely durable, 18-LED flare that is a safe alternative to incendiary flares. -
-
Flash Rate: +/- 65 Times Per Minute
-
Power/Energy: 1.5 Watt Solar Panel/3.6 Volt 4600 mAh Battery Included/Installed
-
Illumination/Brightness: 9 High Intensity Super Bright LEDs; 35+ Candelas
-
Operational Requirements: Ready to Operate Right Out of the Box; All Parts Included; Maintenance Free
-
Length of Operation: 3+ Years
-
Full Solar Charge: Operates 168+ Hours Flashing
-
Overcharge: Protection Built-In
-
Charging Requirements: Re-Charges During Day; No Direct Sunlight Required to Charge
-
On/Off Switch: Operates 24/7 Flashing
-
Lens Cover Material: Polycarbonate
-
Mounting System: Box Style Base with Multiple Mounting Options Available
-
Packaging/Parts Included: 5 Lights Per Box (Fully Assembled); 5 Bolts; 5 Post U-Clamps; 5 Hoods; 1 Security Tool; 1 On/Off Push Pin
-
Colors Available: Amber/Yellow (In Stock); Red
-
-
PRODUCT SPECIFICATIONS Product: Type-A/C Dual Function Solar Powered Barricade Light Product Type: Traffic Safety Light Product #: DF002- Dual Function Mode: Flashing &/or Steady Burn Modes All-in-One
- Flash Rate: +/- 65 Times Per Minute
- Power/Energy: 0.4 Watt Solar Panel/2.4 Volt NiMH Rechargeable 1,600 mAh Battery Included/Installed
- Illumination/Brightness: 2 High-Intensity Super Bright LEDs; 9 Candelas Each
- Length of Operation: 3 to 5+ Years
- Lens Cover: 7" Polycarbonate Lens with Retro-Reflector Ring
- Mounting System: 180 Degree Swivel Box Base; Universal Mounting Bracket & Tool
- Full Solar Charge: Operates 336+ Hours (Flash Mode); 168+ Hours (Steady Mode)
- Charging Requirements: Re-Charges During Day; No Direct Sunlight Required to Charge
- On/Off Switch: Light Automatically Turns On at Dusk & Off at Dawn
- Packaging/Parts Included: 5 Lights Per Box (Fully Assembled); 5 Security Bolts; 1 Security Tool; 1 On/Off Push Pin
- Colors Available: Amber/Yellow; Red;
-
Box Style Base
Product Highlights:
-
FAA Advisory Circular No. 150/5370-2G Compliant
-
Meets the "Buy-American" Provisions of the 2009 ARRA
-
Dual Function Light with Flash or Steady Burn All-In-One
-
Standard Box Style Base with Security Bolt Included
-
Premium Components and Durable Polycarbonate Exterior
-
No Maintenance or Purchase of Batteries Necessary/All Parts Included
-
No Direct Sunlight Required to Power Unit
-
Ready to Operate Right Out of the Box
-
-
Screw/Threaded Style Base
Product Highlights:
-
FAA Advisory Circular No. 150/5370-2G Compliant
-
Meets the "Buy-American" Provisions of the 2009 ARRA
-
Dual Function Light with Flash or Steady Burn All-In-One
-
Standard Size Threaded/Screw-In Base
-
Premium Components and Durable Polycarbonate Exterior
-
No Maintenance or Purchase of Batteries Necessary/All Parts Included
-
No Direct Sunlight Required to Power Unit
-
Ready to Operate Right Out of the Box
-
-
Click here for Attenuator Brochure- Fully re-directive, non-gating, bidirectional, impact attenuator
- Designed to be reset after an impact in under 30 minutes
- Low angle exit on side impacts keep vehicles from rebounding back into traffic.
- Life cycle cost savings with minimum replacement parts needed
- MASH eligible
- All MASH tests were performed including the optional midsize car test using an independent accredited testing facility. Once again, the Smart Cushion established records for ridedown g-forces for small vehicles just like it did with NCHRP350.
- The SCI100GM is a MASH and NCHRP350 Test Level 3 attenuator.
- Variable resistance (speed-dependent), not fixed resistance, provides consistent deceleration during ridedown.
- Longer ridedown distances and lower sustained g-forces for lighter or slower-moving vehicles.
- Quick and easy resets for reduced worker exposure to traffic.
- Low angle of exit on side impacts to keep vehicle from rebounding back into traffic.
- No mobilization required after side impacts reduces public and worker exposure.
- Few replacement parts requirements virtually eliminate spare parts inventory and parts costs.
- Thirty minute resets reduces labor and traffic control costs.
- The reverse-tapered design eliminates side panel stress on frontal impacts to reduce damage and system fatigue from multiple impacts.
- Life cycle cost savings increase dramatically as additional impacts occur.
- No damage on side impact combined with low cost on frontal impacts can save you 75% or more on costs including labor, mobilization and parts
- Systems shipped from factory fully assembled reduce on-site labor.
-
CrashGard® Sand Barrel System is a non-redirective, gating sand barrel, or crash cushion. The system consists of 3 MASH-compliant components: barrel, lid and insert. CrashGard protects drivers from fixed objects like concrete barriers, bridge abutments, and lighting fixtures. Features and Benefits:- One CrashGard Sand Barrel accommodates all weight requirements (200, 400, 700, 1400, and 2100 pounds). Install Insert for 200, 400, 700, and 1,400 lbs. No Insert required for 2,100 lbs.
- Blow-molded from high molecular, high density polyethylene plastic (HLMI/HDPE) that produces a stronger sand barrel.
- UV stabilizers maximize product life. Color-stable pigments resist fading.
- Designed for easy transport: squared bottom accepts forklifts, tiered top accepts CrashGard Hoist.
- Barrels nest easily for convenient storage.
-
- Two head mounted pulleys
- Adjustable to 55" to 91" working height, with 6" adjustments
- 60' Retrieval SRL w/ galvanized cable
- Includes 7297 60' Personnel Winch with 3/16" galvanized steel cable
- Includes storage bags
-
Designed with flexibility in mind, every feature of the EP8AC25P BLOW-R-PAC®, Ventilation Blower complete with 8 inch diameter x 25 foot flexible duct and integral storage canister. is designed to meet the confined space ventilation demands for many construction, utility, and municipal applications. Straight thru, axial flow design maximizes air flow delivery rates with input horsepower. Sturdy, easy-grip handle molded directly into the housing makes for convenient, reliable transport. The tough, double-walled housing is molded from UV-resistant polyethylene, making it dent-resistant, corrosion-proof and virtually indestructible. Air flows rates are certified by an independent testing agency. Specifications: POWER SOURCE Electric Motor: 1/3HP, 115 VAC, 60HZ, single speed Speed Control: Single Speed BLOWER Type: Axial Material: High density, UV resistant polyethylene Size: 8 inch (203 mm) Nominal Diam. inlet/ Outlet and 25 foot flexible duct with integral storage canister GENERAL Material: High density, UV resistant polyethylene Weight: 59 lbs (26.76 kg) DIMENSIONS Height: 15 inch (381 mm) Length: 33.5 inch (850.9 mm) Width: 13.5 inch (342.9 mm) FLOW RATES Free Air: 902.35 CFM (25.55 cmm) One 90 Degree Bend: 547.63 CFM (15.51 cmm) Two: 90 Degree Bends: 477.30 CFM (13.52 cmm) -
GasAlertMax XT II 4-Gas Detector w/ Pump, Comburstible, O2, H2S, and CO, Yellow -
- Protects 33in. square area
- Collapses to only 44in. square x 4in.H for easy storage
- Rail accommodates signs, flags or lights for safety
- Rail locks open and 2 hooking chains provide protected entry and exit
- Simple, one-pc. construction
- No-tool assembly
