- Width: 81 in
- Height: 21 in
- Length: 35.8 in
- Weight: 579 lbs
- SAE Heaped Capacity: 22.8 cu ft
- 6'L Plastic barricade
- Double wall, thick panel
- Sturdy and durable
-
Our Professional Series Low Profile Long Bottom Tooth Buckets are made with a universal skid steer mounting plate that can also accomodate the Case 1840 and Case 1845C mounting. These buckets are made to give you a bucket with a better degree of rollback angle and also to enhance visability even more that the standard low profile buckets we offer. We can add weld-on shanks with pin-on teeth or you may choose a tooth-bar to take on and off as needed. We put wear bars under the bucket (so you don't wear out the bottom), reinforce the sides with 3/8 inch and put a 3/4 inch x 6 inch cutting edge with heavy duty weld on shanks and pin on teeth. All of our Buckets are now powder coated for a long lasting finish! -
Part No.: 3004Weight: 415 lbs.For year-round versatility, there is no better attachment for your skid steer than a 84" Snow/Mulch Bucket. Constructed from high-tensile steel, this bucket has high sides for maximum capacity and a rolled rear bottom for added strength and easier cleanup. The 84" Snow/Mulch Bucket easily scoops up and moves dirt, mulch, snow, gravel and more!- 1/8" Grade 50 High-Tensile Steel construction
- 1/2" x 6" cutting edge
- 1.12 Cubic Yard Capacity
- 84" Wide
-
9" LED Baton w/ 3-Way Switch (Steady Burn / Fast Flash / Off) w/ Belt Clip- Pulsating high intensity LED lights
- Water and impact resistant construction
- (2)C Batteries (not included)
-
Part No.: 3006Weight: 445 lbs.For year-round versatility, there is no better attachment for your skid steer than a 96" Snow/Mulch Bucket. Constructed from high-tensile steel, this bucket has high sides for maximum capacity and a rolled rear bottom for added strength and easier cleanup. The 96" Snow/Mulch Bucket easily scoops up and moves dirt, mulch, snow, gravel and more!- 1/8" Grade 50 High-Tensile Steel construction
- 1/2" x 6" cutting edge
- 1.28 Cubic Yard Capacity
- 96" Wide
-
Guardsafe 36 Barriers- Will not crumble or break after multiple deployments like concrete barriers.
- Create continuous lines or curves angled up to 90º with an easy to use swivel pin design
- Molded-in recessed handles make for easy handling.
- Large, threaded top fill-port and dual bottom drain plugs make it easy to load and unload with sand or water ballast.
- Two molded-in pockets on top of barrier accept standard blinking lights.
- Flat side surfaces easily accept reflective striping.
- Durable polyethylene construction stands up to harsh weather conditions and resists cracks and dents upon impact.
- High resistance to sunlight and ultraviolet radiation means the product stays in service longer.
- Lightweight design makes handling easy.
- Technical Spec Drawings
- Spec Sheet
- Brochure
Standard Colors:
Natural Ora
-
Our Type III Barricades are made from versatile galvanized square tubing for both skids and uprights. The skids are connected to the uprights by a stub weld base receiver. The panels are available in lengths of 4 ft., 6 ft., 8 ft., 10 ft., and 12 ft. Reflective sheeting is available in 3M™ Diamond Grade, High Intensity Prismatic, or Engineer Grade Prismatic on one or both sides. Assembly Required. -
- Plastic legs with rubber feet
- Rubber feet are securely attached
- Made of recycled rubber
- Feet rotate for stacking
- Stacking lugs on panels
- Keep units from sliding while stacked
- Tamper resistant linking bracket
- In-line barricades won't pull apart
- Units pivot on linking brackets
- Allows for various configurations
- Adjusts to uneven ground
- Panels accept striped sheeting
- Both sides of barricade
- Holes for bolting signs
- Made in the U.S.A.
- Sheeting area is 5.5"H x 51"L
- Dimensions: 74”W x 39.5”H,
- Connected Length is 6'
- Weight: 32 lbs.
- Plastic legs with rubber feet
-
Multi-Purpose Barricade System- ADA Pedestrian Pathway System
- Crowd Control
- Longitudinal Channelizing Device
- Manhole Guard
- Multi-functional barricade system meets ADA requirements
- 72"Lx38"H
- Continuously detectable edge at barricade top and bottom
- Exclusive tripod leg system
- No sandbags needed when using 3 feet
- Anti-trip foot on one side
- Two larger feet on other side
- Use only larger feet with sandbags for ADA Compliance
- Easy handle turn deploys feet
- Unique soft grip handle system
- Quick turn moves feet out or back in
- Four recessed sheeting areas
- Two sheeting areas, 8" x 50", on each side of panel
- Your choice of retroreflective striped sheeting
- Light shelves for standard barricade lights
- 2 per section
- Stack 20% more
- Nesting system allows for 19 units stacked on pallet
- Lowers transportation costs
- Stacking lugs keep units from shifting
- Shape to any layout
- Nesting units pivot 120 degrees
- 3 units in triangle layout for manhole guard
- Robust dual connectors
- Create easy to use linking system
- Smooth, comfortable guard rail
- Rounded edge on top of panel
- Holes for attaching signage
- Use screws to attach 20"W x 14"H sign
- MASH Accepted
- WZ-428
- Meets MUTCD Standards
- Made in the U.S.A.
-
Product Features:- Available in 4', 6' and 8' lengths
- Blow-molded from high density polyethylene, UV stabilized, with reinforced structure
- Wave design strengthens, stiffens centerboard; reduces sagging and warping
- Closed ends prevent dirt and moisture from collecting, prevents bees and hornets from building nests
- Molded-through holes add strength and support, make installations faster
- Retroreflective sheeting meets all state and federal specifications, and is available in Engineer, Hi-Intensity, and Diamond Grades.
- FHWA Acceptance Letter WZ-173, WZ-336 and WZ-244
-
Product Features:- MASH Approved
- NCHRP-350 Certified
- Meets MUTCD Standards
- Rugged heavy-duty design
- Designed for easy nesting and stacking
- Stenciling available
- Recessed and replaceable sheeted panels
- Accepts weight cartridge for additional weight
- Accepts barricade lights
-
Hand Protection A wide and increasing range of Hand Protection styles is available. In order to help cater to every need. Only the best materials and manufacturing methods are used in the production of Portwests' extensive range of Hand Protection products. Portwest A625 Features:- High-visibility liner
- Tested for both cut and heat protection
- PU foam coating for excellent grip in wet and dry conditions
- Smooth PU coating for increased abrasion resistance
- Palm dipped to increase dexterity and ventilation
- 100% breathable seamless liner
- 13 gauge liner for a perfect fit
- CE Certified
- ANSI/ISEA 105 - 2016 CUT Level A4
- EN 388:2016 - 4X43D
- EN 407 X1XXXX
- EN 420
-
Roll Sizes Available: 4"x120' and 4"x360'- 3M™ Stamark™ Wet Reflective Removeable Tape Series 710 can help improve work zone safety by marking temporary work zone lanes with removable, highly reflective, all-weather pavement markings
- Pressure sensitive adhesive eliminates the need for surface preparation adhesive
- Superior adhesion and conformability
- Highly reflective in wet or dry conditions with a raised pattern profile
-
Roll Sizes Available: 4"x120' and 4"x360'- 3M™ Stamark™ Wet Reflective Removeable Tape Series 710 can help improve work zone safety by marking temporary work zone lanes with removable, highly reflective, all-weather pavement markings
- Pressure sensitive adhesive eliminates the need for surface preparation adhesive
- Superior adhesion and conformability
- Highly reflective in wet or dry conditions with a raised pattern profile
-
Roll Sizes Available: 6"x120' and 6"x360'- "Light structured" comformable tape, making it resistant to the most demanding traffic requirements
- Intended to temporarily cover existing road markings on highway and urban construction work zones
- Highly skid resistant
- Matt black colour helps minimise glare in sunny or wet conditions
- View all details
-
Additional Information Product Data Sheet A special blend of raw materials that are safe on all surfaces and designed for temporary upside-down marking.- Mark disappears in 10-20 days when exposed to water, traffic, and other abrasions.
- May also be washed off with a pressure washer Color: White
-
Additional Information Product Data Sheet A special blend of raw materials that are safe on all surfaces and designed for temporary upside-down marking.- Mark disappears in 10-20 days when exposed to water, traffic, and other abrasions.
- May also be washed off with a pressure washer Color: Yellow
-
Additional Information Product Data Sheet Solvent-based striping paint adheres to a variety of surfaces, including asphalt and concrete. Applications: parking lots, warehouse aisles, school yards, tennis courts, and factory safety aisles.- Fast drying - 5 minutes to touch
- Durable, long-lasting stripe
- High-visibility colors
- VOC compliant and lead-free
- Non-clogging spray tip
- Excellent resistance to traffic, oil and gasoline
- One case of aerosol paint will yield a 4-inch stripe approximately 700 linear feet
-
Additional Information Product Data Sheet Solvent-based striping paint adheres to a variety of surfaces, including asphalt and concrete. Applications: parking lots, warehouse aisles, school yards, tennis courts, and factory safety aisles.- Fast drying - 5 minutes to touch
- Durable, long-lasting stripe
- High-visibility colors
- VOC compliant and lead-free
- Non-clogging spray tip
- Excellent resistance to traffic, oil and gasoline
- One case of aerosol paint will yield a 4-inch stripe approximately 700 linear feet
-
Additional Information Product Data Sheet Solvent-based striping paint adheres to a variety of surfaces, including asphalt and concrete. Applications: parking lots, warehouse aisles, school yards, tennis courts, and factory safety aisles.- Fast drying - 5 minutes to touch
- Durable, long-lasting stripe
- High-visibility colors
- VOC compliant and lead-free
- Non-clogging spray tip
- Excellent resistance to traffic, oil and gasoline
- One case of aerosol paint will yield a 4-inch stripe approximately 700 linear feet
-
Additional Information Product Data Sheet Solvent-based striping paint adheres to a variety of surfaces, including asphalt and concrete. Applications: parking lots, warehouse aisles, school yards, tennis courts, and factory safety aisles.- Fast drying - 5 minutes to touch
- Durable, long-lasting stripe
- High-visibility colors
- VOC compliant and lead-free
- Non-clogging spray tip
- Excellent resistance to traffic, oil and gasoline
- One case of aerosol paint will yield a 4-inch stripe approximately 700 linear feet
-
Additional Information Product Data Sheet Solvent-based striping paint adheres to a variety of surfaces, including asphalt and concrete. Applications: parking lots, warehouse aisles, school yards, tennis courts, and factory safety aisles.- Fast drying - 5 minutes to touch
- Durable, long-lasting stripe
- High-visibility colors
- VOC compliant and lead-free
- Non-clogging spray tip
- Excellent resistance to traffic, oil and gasoline
- One case of aerosol paint will yield a 4-inch stripe approximately 700 linear feet
-
Designed with flexibility in mind, every feature of the EP8AC25P BLOW-R-PAC®, Ventilation Blower complete with 8 inch diameter x 25 foot flexible duct and integral storage canister. is designed to meet the confined space ventilation demands for many construction, utility, and municipal applications. Straight thru, axial flow design maximizes air flow delivery rates with input horsepower. Sturdy, easy-grip handle molded directly into the housing makes for convenient, reliable transport. The tough, double-walled housing is molded from UV-resistant polyethylene, making it dent-resistant, corrosion-proof and virtually indestructible. Air flows rates are certified by an independent testing agency. Specifications: POWER SOURCE Electric Motor: 1/3HP, 115 VAC, 60HZ, single speed Speed Control: Single Speed BLOWER Type: Axial Material: High density, UV resistant polyethylene Size: 8 inch (203 mm) Nominal Diam. inlet/ Outlet and 25 foot flexible duct with integral storage canister GENERAL Material: High density, UV resistant polyethylene Weight: 59 lbs (26.76 kg) DIMENSIONS Height: 15 inch (381 mm) Length: 33.5 inch (850.9 mm) Width: 13.5 inch (342.9 mm) FLOW RATES Free Air: 902.35 CFM (25.55 cmm) One 90 Degree Bend: 547.63 CFM (15.51 cmm) Two: 90 Degree Bends: 477.30 CFM (13.52 cmm) -
Orange and White checkered safety flags are made of heavy duty nylon coated vinyl material and fully meet the FAA requirements for operating a vehicle on the airfield or placed at the top of a crane operating within the critical airspace of the airport. -
Our Alphabet Set was specifically designed with lean edges so that there is precise spacing between letters. We’ve been using this font and template for almost 25 years, so if your original set has been damaged, you won’t lose continuity. That’s why it’s one of our best sellers. Heights from 3″ to 96″ available The 29 piece set consists of- 1 each of letter A thru Z,
- 1 spacer and 2 end pieces
- A, A, B, C, C, D, E, E, E, F, G, H, I, I, J, K, L, M, M, N, N, O, O, P, Q, R, R, S, S, T, U, V, W, X, Y, Z
- 2 spacers and 2 end pieces
-
The fully coated Aqua Cut Pro glove offers level D cut resistance. The first coat is a smooth nitrile and the second coat is foam nitrile, providing a secure grip and a barrier against contaminants. Elastic wrist cuff provides a secure fit. SIze S,M,L,XL,XXL -
Aquaphalt is an eco-friendly material for patching asphalt and concrete road surfaces. Just pour into the pothole, water and tamp – easy as that! This product is used for repairing potholes, pavement damage, parking lots, utility cuts, tennis courts, walkways, bridge joints, manhole restorations and driveways. Aquaphalt is ranked #1 by Consumer Reports for asphalt patching materials. It’s easy to use and leaves you with a permanent repair.- Eco-friendly binder reacts and hardens with only water-no toxic solvents
- Minimize roadway disruption with no need for special preparations
- Lay directly from its container-no need to mobilize large crews and equipment
- Material is a pre-mixed, just add water
- Sets immediately, even in wet and cold conditions
- You will actually save you time and money by eliminating costly repeat repairs
- Can be sealed 24 hours after installation
-
CLICK HERE FOR STAPLE SPECIFICATIONS -
The HT55 is Arrow’s best-selling slim Hammer tacker. The lightweight, stamped steel housing is precisely balanced to deliver quick, powerful strikes. The ergonomic rubber handle with integrated hand stop means the operator’s hand won’t slip and a rugged rear load magazine holds two full strips of staples, minimizing downtime for reloading. HT55 is great for insulation, flooring, and roofing applications where speed and ease of use are key. -
Arrow’s iconic model T50 is America’s best-selling staple gun. Proudly made in the USA, it features an all chromed steel housing, jam resistant mechanism, powerful coil spring, staple viewing window, and steel working parts hardened in a 1,500 degree furnace. The number one choice of generations of professionals and homeowners alike, the Arrow T50 has become legendary for its uniquely American blend of functionality, dependability, and sheer ruggedness. -
SOLAR-ASSISTED ADVANCE WARNER ARROW BOARD The Arrowmaster Pro-Line Arrow Board is a versatile, low operating cost arrow board. The revolutionary low power draw controller and LED lamps provide maximum visibility while directing traffic through construction zones. The controller is in an easy-to-access lockable location inside the back of the sign case with the batteries securely enclosed and hidden inside the trailer deck. The solar panel is positioned for maximum charging capabilities in both the operating and travel modes. Available with 15 or 25 lights, the 5″ amber PAR 46, LED lamp is a sophisticated, high-output, low-power-consumption, sealed-beam lamp with a life that is unparalleled by other conventional arrow board lamps. The solid-state controller incorporates Auto Track, an automatic, full-time tracking system that adjusts the lamp intensity to the ambient light conditions. FEATURESSINGLE, TOP-MOUNTED SOLAR PANEL UNIT IN CONSTANT HORIZONTAL POSITIONON-BOARD SELF-CONTAINED CONTROLLER WITH 7 MODES OF OPERATIONDISCREET BATTERY ACCESS COVER AND REMOVABLE TONGUE IS DESIGNED FOR SAFETY AND SECURITY2″ BALL STANDARD PINTLE RING HITCH AVAILABLE AS AN OPTIONFIVE-YEAR STANDARD WARRANTY AND NTCIP-COMPLIANT AND MEETS MUTCD REQUIREMENTS15-LIGHT ARROWMASTER™ PRO-LINE UNIT- Model No. – WAAW-PL15C
- Description – Arrowmaster Pro-Line w/Onboard AC CHarger, Standard Angularity
- Shipping Weight – 963 lbs
- Tongue Weight (Panel Down) – 75 lbs
- Tongue Weight (Panel Up) – 75 lbs
- Length with Tongue – 116″
- Width – 68″
- Traveling Height – 93″
- Operation Height – 142″
- Sign Panel Size – 48″H x 96″W
- Number of Batteries – 4
- Battery Type – 12 V 18AH wired in parallel
- Width: 68"
- Length: 116"
- Height: 142"
- Weight: 993 lb
-
The Flagger-Mac is an Automated Flagger Assistance Device (AFAD) designed to be operated by a remote control to keep flaggers out of harm’s way. Its innovative design features a breakaway arm mechanism that simply clicks back into place in case of impact. Powered by Ver-Mac’s robust battery/solar power management system, the Flagger-Mac is operated by an intuitive V-Touch Controller and a wireless remote controller. Increased safety and less redundancy equal a safer choice for your teams, and a profitable one for your business.- Material: PVC
- Reflective tape
- Superior performance ITE lamps: MUTCD compliant,energy-efficient
- Gate height: 4 in. (102 mm)
- Gate height off the ground (down position): 4ft. (471/4 in. / 1200 mm)
- Telescopic gate length: 48 to 78 in. (1219.2 to 1981.2 mm)
- Gate operating height (up position): 166 in. (4214 mm)
-
The PCMS-1500 is a full-matrix portable message sign ideal for displaying messages with a variety of text, graphics, and font sizes for highway work zones. State-of-the-art LEDs, an autonomous power design, minimal maintenance, and easy remote management make the PCMS-1500 the most visible, reliable, and cost-effective message sign in the industry.- Display panel: 131 x 75 in. (3331 x 1917 mm)
- Full-matrix of 30 x 56 pixels
- 4 LEDs per pixel
- 3 lines of 8 characters per line (default) & graphics capability
- 5 x 7 pixels (18 in.) characters (default)
- Display sign rotates 360o for perfect setting
- Improved plug-and-play display modules for simplified maintenance
-
The medium-sized PCMS-320 is the ideal changeable message sign for urban areas where space is limited. Sturdy and durable, this trailer-mounted model requires little maintenance. Its intuitive remote management will maximize the safety of your workers while saving them time. Solar-powered and easy to set up, the PCMS-320 will give you an excellent return on your investment for years to come.- Display panel: 64 x 105 in. (1625 x 2667 mm)
- Full-matrix of 30 x 48 pixels
- 4 LEDs per pixel
- 3 lines of 8 characters per line (default 5 x 7 font)
- Default font of 13 3/4 in. (350 mm) (5 x 7 pixels)
- Up to 3 lines & 11 characters per line (3 x 7 font)
- Plug-and-play display modules for simplified maintenance
-
The PCMS-548 changeable message sign offers many display possibilities along with maximum autonomy. Sturdy and versatile, this trailer-mounted model adapts to a multitude of uses while being very easy to set up. Its intuitive remote management will maximize the safety of your workers while saving them time. A cost-effective message sign for years to come.- Display panel: 45 x 80 in. (1142 x 2026 mm)
- Full-matrix of 30 x 56 pixels
- 2 LEDs per pixel
- 3 lines of 9 characters per line (5 x 7 default font)
- Up to 3 lines of 13 characters (3 x 7 font)
- Plug-and-play display modules for simplified maintenance
