- 73.5 cc professional-grade, 2-stroke engine
- Four-stage air filtration system protects engine from harmful dust ingestion
- Decompression valve for easier starter pulling effort
- Momentary stop switch automatically returns to "on" position
- Purge bulb provides fresh fuel to carburetor
- Side-access belt tensioner for easy belt adjustment
- Reversible cutting head can be moved to enable cutting near a wall or close to the ground
- Aluminum handle with rubber grip for comfort and vibration reduction
- Brass water valve controls flow of water
- Quick release hose adapter to attach hose for water supply
- Abrasive wheel included, diamond wheel sold separately
- Engine Displacement (cc) 73.5
- Max. spindle Speed (rpm) 3,280
- Arbor Size (mm) 20 & 25.4
- Fuel Capacity (fl oz) 23.7
- Start/Stop Switch Momentary
- Purge Bulb Yes
- Max. Cutting Depth (in) 4.9
- Max Engine speed (rpm) 9,800
- Drive System Ratio 2.6
- Weight (w/o wheel) 23.6
- Wheel Diamater (in) 14"
- Decompression Valve Yes
- Choke w/ Fast Idle Yes
-
CSG-7410 Features -
With its telescopic mast that can extend up to 9 metres (30 feet), our CT-2430 trailer-mounted camera is ideal for all your mobile video surveillance needs. Its robust design withstands the elements and provides stability and ease of use. The CT-2430 runs on solar power, meaning it produces no noise or emissions. It’s the ideal solution for ensuring the safety of your work zone, construction site or outdoor event.- 30 amp battery charger
- 30’ orange painted mast (9 m)
- 3 solar panels of 85 watts each, tilt (up to 45 °) and rotate (360 °)
- Eight 6 volt deep cycle batteries (default). Possibility to have up to 12 batteries
- Solar regulator to protect the batteries against overcharging, over-discharging and short circuits
-
Mark your Custom Safety Cones With:- Company / Department Names.
- Messages.
- Logos & Symbols (We can help you to create/digitalizing your Logo)
-
Aluminum, Coroplast Yard Signs, Banners, and MORE!. Reflective or Non-Reflective. ANY COLOR! -
- Any combination of words,numbers, and symbols
- Heights from 3″ to 96″
- Priced per character, no charge for spaces, periods, commas, or hyphens.
-
JBC Delineator Post: 42"H D-Top Post with Reflective Collars Use these posts for temporary placement where space is limited and height is important. Low-density polyethylene construction maintains superior resistance to impact over a wide temperature range. A specially designed 4" channel protects the 3" high-intensity reflective tape. D-Top Delineator Post has a 3" hand grip on top for ease of loading and unloading. It is also designed to be used with caution tape and/or JBC Cone Bars to form an instant barrier. Hole at top to mount a barricade light. Posts are fluorescent orange throughout and 3M Prismatic Sheeting for maximum visibility. 12lb bases slip over the post to keep it in place. -
A one-part, fast cure adhesive for bonding concrete barrier markers, guardrail reflectors and other delineation products. 795A requires no mixing, is effective over a broad temperature range, has excellent weathering properties and offers “primer-less” adhesion to concrete, asphalt and steel. (10 ounce standard, 20 ounce tubes available by special order). Used with a standard caulking gun. -
FeaturesThe DAX FIFTY50 Orange and Carbon Fiber Hardhat is a full brim, carbon fiber reinforced resin hard hat offering a 6 point suspension system for superior comfort and impact protection. It features an innovative synthetic leather comfort dome and an over-sized ratcheting fitment dial that makes adjustment easy even while wearing gloves.-
A Carbon Fiber reinforced resin shell provides superior structural rigidity.
- Brim grip, exclusive design provides a secure feel
- Perforated synthetic leather comfort dome with molded EVA foam insert for additional shock absorbing protection to the top of head
- Oversized ratcheting fitment dial to adjust size, easy to grip and use with gloves on
- Meets ANSI Z89.1-2014 requirements for Type 1, Class C.
- Designed to offer outstanding protection in hot and dangerous industries, the DAX Hard hat shell has been tested to radiant heat loads producing temperatures up to, but not exceeding, 350˚ F (177˚ C).
- Moisture-wicking foam backed microfiber liner reduces sweat build-up
- 6 point suspension system for a secure, comfortable fit
- Triple reinforced crown for superior impact protection
Hard Hat WeightOur Carbon Fiber Hardhat Weighs in at an average 315 grams without suspension system. With suspension it weighs on an average of 460 grams.NoticesPlease note all DAX FIFTY50 Hard Hats use a special composite material to create the helmet’s front color. This process requires three panels and will show a subtle seam following the helmet’s contour to the brim grip. This is done by design and is not a flaw in the hard hat.
CSA Standard:This product currently does not carry the certification established by the Canadian Standards Association (CSA).
Hi-Visibility hard-hats may fade after extended periods of time in direct sunlight.
LifespanHard hat lifespan may vary depending on the conditions of each work site. Hard hats subjected to more wear and tear or used outdoors in direct sunlight may need to be replaced more frequently. Daily inspections are the best way to determine when to replace a hard hat shell, suspension, or the entire unit. Suggested replacement is based on service life (Based on when the hard hat was placed into service, not the manufacture date). As a general guideline we recommend replacing hard hats every five years regardless of outside appearance, but this can vary due to use and job site conditions -
-
FeaturesThe DAX Desert Camo Hard Hat is a full brim, fiber reinforced resin hard hat offering a 6 point suspension system for superior comfort and impact protection. It features an innovative synthetic leather comfort dome and an over-sized ratcheting fitment dial that makes adjustment easy even while wearing gloves.- Fiber reinforced resin shell for superior impact protection
- Brim grip, exclusive design provides a secure feel
- Perforated synthetic leather comfort dome with molded EVA foam insert for additional shock absorbing protection to the top of head
- Oversized ratcheting fitment dial to adjust size, easy to grip and use with gloves on
- Meets ANSI Z89.1-2014 REQUIREMENTS FOR TYPE 1 CLASS G
- Moisture-wicking foam backed microfiber liner reduces sweat build-up
- 6 point suspension system for a secure, comfortable fit
- Triple reinforced crown for superior impact protection
Hard Hat WeightOur Carbon Fiber Hardhat Weighs in at an average 315g grams without suspension system. With suspension it weighs on an average of 460 grams. CSA Standard:This product currently does not carry the certification established by the Canadian Standards Association (CSA)Uniquely DesignedEach Dax hard hat carbon fiber shell is hand laid giving it a unique, one of a kind appearance.LifespanHard hat lifespan may vary depending on the conditions of each work site. Hard hats subjected to more wear and tear or used outdoors in direct sunlight may need to be replaced more frequently. Daily inspections are the best way to determine when to replace a hard hat shell, suspension, or the entire unit. Suggested replacement is based on service life (Based on when the hard hat was placed into service, not the manufacture date). As a general guideline we recommend replacing hard hats every five years regardless of outside appearance, but this can vary due to use and job site conditions -
Our DAX Hard Hat LUX Suspension includes headband, brow band and crown straps. One-handed ratchet adjuster provides an easy-to-use, comfortable fit. Features and Specs:- Comfort dome has increased plush padding.
- 6-point ratchet liner suspension system for ultimate comfort and reliability
- Used for DAX Hard Hat or Cap.
-
The 8 Piece Full Polish Metric Combination Wrench set offers a variety of metric combination wrenches for any user need. These wrenches have a long panel design to provide more reach during use and the ability to apply more torque to a fastener. These wrenches also have DirectTorque™ technology to help prevent the rounding of fasteners. -
The 625 lights are a bright, powerful, economical, line of multi-voltage quad flash and double flash strobe lights. The Q625 features 75 quad FPM for an exceptional attention getting display. The DFS625 has the same housing with 75 double FPM and is also available in 120V AC. The 625 series comes standard with a black ABS plastic base and fresnel lens. The 625 lights have an optional flange mount base and/or 6" tall dome for greater light output and a higher profile. The 625P strobe lights include a 1/2" pipe mount plate added to the base of the light. Specifications:Lens Color Amber, Blue, Clear, Green, Red Operating Voltage 120V AC Rated Current .2 Amperes Flashes per Minute (FPM) 75 DF Light Output 650 candelas/second Joule Rating - Output Energy 6.25 Joules Mounting Flange Base Mount Diameter 5.5 inches Height 6.25 inches Bulb Part # L3-77 UL Listed No
