• Weatherproof hi-vis polyester material — Teflon™ treated • Elastic band at the waist and wrists • Chest pocket with clear panel and hook and loop closure 2 mic tabs
-
• TALL SIZING AVAILABLE!! • Low Piling Polyester fleece material • Color blocking at the bottom • 2” silver reflective tape • Two lower pouch pockets • Hood with adjustable pull cords
-
Outer Parka – Pockets: Outer shell: 7 outside, 5 inside
-
Weatherproof hi-vis ripstop polyester shell with quilted lining – Teflon™ treated
-
Elastic band at wrists
-
Concealed detachable hood with drawstring and slack adjustment
-
Interior access zipper for print customization
-
Dual zipper front closure with hook & loop storm flap
-
Badge lanyard, d-ring hook, and 2 mic tabs
-
Drawstring around bottom
Inner Jacket – Pockets: Inner shell: 2 outside, 2 inside
-
Hi-vis lime polyester fleece
-
2" non-connected silver reflective material
-
Drawstring around bottom
-
-
• Weatherproof polyester shell with zip out polar fleece liner • Elastic band at the wrists • Concealed detachable hood with drawstring • Zipper front closure • Interior access zipper for print customization • Cell phone/radio chest pocket with clear panel • 2 mic tabs • Drawstring around bottom -
• Weatherproof • Polyester shell with quilted lining • Elastic band at the waist and wrists • 2” silver reflective material • Concealed hood • Zipper front closure • TALL SIZING AVAILABLE FOR $9.00 MORE! -
• Weatherproof polyester shell with zip out polar fleece liner • Pockets on outer shell and removable fleece liner • Concealed detachable hood • 2" wide reflective material • Cell phone/radio chest pocket with clear panel on outside shell • Mic tabs, pencil pockets -
Weatherproof hi-vis polyester material – Teflon™treated • X pattern on back • Elastic band at the waist and wrists • Chest pocket with clear panel and hook & loop closure • 2 mic tabs, Drawstring hood • Zipper front closure -
• 100% Polyester 300D Oxford Weave with a strain resistant finish • Waterproof with sealed seams • Quilt lined for thermal insulation • Pack away hood • Two-way zipper for quick and easy access • Inner knitted cuff -
• 2" silver HiVisTex Pro heat applied segmented reflective tape with contrast material • Fully reversible to black side • Reversible, detachable hood • Elasticated knitted waistband and cuffs • 2 side weapon access openings with snap closure • Badge holder & mic tab on outer & reverse side of jacket • Stormflap with zipper and concealed snap closure • Print access for garment customization • Waterproof with sealed seams -
• Segmented reflective tape • Provides insulated and thermal protection • Hood for added protection against the elements • Contrast panels for protection against dirt • Ribbed cuffs for warmth and comfort • Ribbed hem for a comfortable fit -
• 300D Oxford Wave with a stain resistant finish • Waterproof with sealed seams • Extremely water-resistant fabric finish, water beads away from fabric surface • Detachable ID pocket • Quick dry knitted cuff for a snug & comfortable fit • Contrast fleece collar for protection against dirt • Curved back hem for added protection • Drawcord adjustable hem • Insulatex ™ heat reflective lining reflects heat back into the body ensuring maximum warmth and comfort • Certified to ANSI/ISEA 107 after 50x washes • Quilt lined for thermal insulation • 2” segmented reflective tape -
• 4-way stretch fabric for ease of movement and added comfort • Thumb loop • Elasticated cuffs for a secure fit • Curved back hem for added protection • Internal pockets for safe storage • Segmented reflective tap -
The STUDSON SHK-1 Non-Vented Safety Helmet is designed to tackle the toughest tasks in high-risk environments. Built with the same innovative materials and advanced protection as its vented counterpart, this version is tailored for electricians, utility workers, and others in environments where electrical safety is paramount. -
For industrial professionals and safety leaders who prioritize worker safety and comfort in high-risk trades, the STUDSON SHK-1 Full Brim Vented Safety Helmet delivers advanced head protection without compromise. This ANSI Type II compliant helmet is engineered to safeguard against impacts from the top, front, side, and rear, providing comprehensive impact protection you can trust. The vented, Class C design ensures optimal airflow, keeping you cool and focused even in hot and physically strenuous conditions. -
With its two-digit LED display and two flashing beacons, the SP-710-DSL Trailer-Mounted Work Zone Digital Speed Limit Sign is ideal for warning motorists of an upcoming speed reduction. With its intuitive V-Touch Controller and JamLogic remote management software, you can adapt the display to the presence or absence of workers. Foldable, autonomous and robust, the SP-710-DSL is easy to deploy in hazardous areas.- Speed display panel: 24 1/2 x 42 3/8 in. (622 x 1076 mm)
- 2-digit (mph) white LEDs
- 5 x 7 pixels
- 4 LEDs per pixel
- Automatic brightness adjustment
- One 48 x 60 in. speed limit sign (R2-1)*
- One 48 x 12 in. work zone plaque (G20-H5bP)*
- Bottom of R2-1 sign 7’ above roadway
-
The industry’s first sign to include a digital speed limit and speed feedback sign on the same platform, the Speed Wizard is the perfect combination to encourage motorists to slow down for worker safety. Part of our Connected Work Zone Notification System, the Speed Wizard can send notifications to motorists via navigation applications like Waze, informing them of the reduced speed limit before they reach the work zone. Autonomous, foldable and robust, the award-winning SP-3248-DSL Speed Wizard is our most comprehensive solar-powered speed sign for smart work zones to date.WZDSL DISPLAY
- Speed display panel: 241/2 x 423/8 in. (622 x 1076 mm)
- Two-digit (mph) white LEDs
- 5 x 7 pixels
- 4 LEDs per pixel
- Automatic brightness adjustment
- One 48 x 60 in. speed limit sign (R2-1)
- One 48 x 12 in. work zone plaque (G20-H5bP)
SPEED AWARENESS DISPLAY
- Speed display panel: 241/2 x 423/8 in. (622 x 1076 mm)
- Full-matrix display (32 x 48 pixels)
- High-definition display cards
- 1 LED per pixel (amber)
- Automatic brightness adjustment
POWER SUPPLY CONFIGURATION
- SOLAR/BATTERY POWERED - Designed to run continuously for an entire construction season
-
The Flagger-Mac is an Automated Flagger Assistance Device (AFAD) designed to be operated by a remote control to keep flaggers out of harm’s way. Its innovative design features a breakaway arm mechanism that simply clicks back into place in case of impact. Powered by Ver-Mac’s robust battery/solar power management system, the Flagger-Mac is operated by an intuitive V-Touch Controller and a wireless remote controller. Increased safety and less redundancy equal a safer choice for your teams, and a profitable one for your business.- Material: PVC
- Reflective tape
- Superior performance ITE lamps: MUTCD compliant,energy-efficient
- Gate height: 4 in. (102 mm)
- Gate height off the ground (down position): 4ft. (471/4 in. / 1200 mm)
- Telescopic gate length: 48 to 78 in. (1219.2 to 1981.2 mm)
- Gate operating height (up position): 166 in. (4214 mm)
-
With its many display capabilities and built-in radar, the PCMS-548LE is law enforcement’s message sign of choice for raising awareness in urban areas or tight spaces. In addition to its high-visibility display, it can serve as a radar speed sign. Sturdy and durable, this trailer-mounted model requires little maintenance and has excellent autonomy. Its intuitive remote management will maximize the safety of your workers while saving them time. A cost-effective message sign for years to come.- Display panel: 45 x 80 in. (1143 x 2026 mm)
- Full matrix of 30 x 56 pixels
- 2 LED per pixel
- 3 lines of 9 characters per line (5 x 7 default font)
- Up to 3 lines of 12 characters per line (3 x 7 font)
- Display sign rotates 360 degrees for perfect setting
- Plug-and-play display modules for simplified maintenance
-
The PCMS-548 changeable message sign offers many display possibilities along with maximum autonomy. Sturdy and versatile, this trailer-mounted model adapts to a multitude of uses while being very easy to set up. Its intuitive remote management will maximize the safety of your workers while saving them time. A cost-effective message sign for years to come.- Display panel: 45 x 80 in. (1142 x 2026 mm)
- Full-matrix of 30 x 56 pixels
- 2 LEDs per pixel
- 3 lines of 9 characters per line (5 x 7 default font)
- Up to 3 lines of 13 characters (3 x 7 font)
- Plug-and-play display modules for simplified maintenance
-
The medium-sized PCMS-320 is the ideal changeable message sign for urban areas where space is limited. Sturdy and durable, this trailer-mounted model requires little maintenance. Its intuitive remote management will maximize the safety of your workers while saving them time. Solar-powered and easy to set up, the PCMS-320 will give you an excellent return on your investment for years to come.- Display panel: 64 x 105 in. (1625 x 2667 mm)
- Full-matrix of 30 x 48 pixels
- 4 LEDs per pixel
- 3 lines of 8 characters per line (default 5 x 7 font)
- Default font of 13 3/4 in. (350 mm) (5 x 7 pixels)
- Up to 3 lines & 11 characters per line (3 x 7 font)
- Plug-and-play display modules for simplified maintenance
-
The PCMS-1500 is a full-matrix portable message sign ideal for displaying messages with a variety of text, graphics, and font sizes for highway work zones. State-of-the-art LEDs, an autonomous power design, minimal maintenance, and easy remote management make the PCMS-1500 the most visible, reliable, and cost-effective message sign in the industry.- Display panel: 131 x 75 in. (3331 x 1917 mm)
- Full-matrix of 30 x 56 pixels
- 4 LEDs per pixel
- 3 lines of 8 characters per line (default) & graphics capability
- 5 x 7 pixels (18 in.) characters (default)
- Display sign rotates 360o for perfect setting
- Improved plug-and-play display modules for simplified maintenance
-
Roll-Up Stop/Slow Paddle with Flashing LED Lights- Meets all MUTCD specifications
- Great for flagging in stormy weather, Fire and Police emergency scenes, vehicle recovery operations, disaster operations, and high risk infrastructure planned night work
- Double-sided octagon sign face is made of retro-reflective Super Bright™ material
- 24 bright white perimeter LEDs
- Push button for on/off, steady burn, and two flashing modes
- Up to 48 hours flashing time on three AAA batteries
- Roll-up design protects sign face from damage and provides compact storage
- Handle and staff are ABS plastic with tube and socket connectors and locking spring buttons
- Two position telescopic staff provides 6 and 7 foot display heights (measured for the ground to the bottom edge of the sign)
- Heavy duty vinyl storage bag with hook & loop closures included
-
Product Features:- MASH Approved
- NCHRP-350 Certified
- Meets MUTCD Standards
- Rugged heavy-duty design
- Designed for easy nesting and stacking
- Stenciling available
- Recessed and replaceable sheeted panels
- Accepts weight cartridge for additional weight
- Accepts barricade lights
-
Product Features:- Available in 4', 6' and 8' lengths
- Blow-molded from high density polyethylene, UV stabilized, with reinforced structure
- Wave design strengthens, stiffens centerboard; reduces sagging and warping
- Closed ends prevent dirt and moisture from collecting, prevents bees and hornets from building nests
- Molded-through holes add strength and support, make installations faster
- Retroreflective sheeting meets all state and federal specifications, and is available in Engineer, Hi-Intensity, and Diamond Grades.
- FHWA Acceptance Letter WZ-173, WZ-336 and WZ-244
