- 12-3/4"x10.5"
- Non-Reflective White Finish
- Easy to install on any standard traffic cone or delineators
- Available in White or Orange
- CUSTOM - Any wording
-
-
#06651 (10-Pack) • High-quality bungey with heat-treated wire hooks • Black vinyl-coated to prevent rusting -
#06622 6 – 10″ x 4mm 5 – 13″ x 8mm 5 – 18″ x 8mm 5 – 24″ x 8mm 2 – 30″ x 9mm 2 – 36″ x 10mm Bright Red, Blue, Green and Yellow. -
High Quality Digital Camo -
#34404 (2-Pack) • Wide handle ratchet / moulded rubber handles • Makes tightening easy on the hands -
The Hughes portable, self-contained 10-gallon gravity-fed eyewash station is suitable wherever continuous water isn’t available—no plumbing needed. The gravity-fed eyewash supplies a continuous, controlled flow that exceeds the ANSI Z358.1 standard of 1.5 LPM (0.4 GPM) for 15 minutes, providing a reliable safety solution no matter where you are located. Concealed mounting bracket make moving and relocating easy. High-visibility color is easy to identify in emergency situations. Simple to use with pull-down activation handle. Easy to maintain—wide fill opening enables quick inspection, cleaning and filling. -
• 3300 lb. WLL • With Bonus Web Clamp • Long wide handle ratchet -
- Intelligent radio tech automatically positions flares in correct sequence for quick deployment.
- Any one flare controls entire network of flares. Changing a parameter such as pattern only requires the user to use one flare. That flare will send a message to the network of flares and will change their patterns as well. In addition, no need to turn off each flare. The user can do a "group off" from any flare and all the flares will turn off.
- 50+ foot range (15 meters) between flares (when on the ground), 1,000 feet (330 meters) when placed on top of a cone. No limit to the number of flares in a string.
- Rugged and compact, the flares can withstand the harsh environment of a roadway while stowing small in vehicle or motorcycle.
- "Moving" light is more effective at alerting and guiding drivers than random-flashing stationary patterns.
- 12 bright through-hole side LEDs, 4 bright surface mount top LEDs
- 1-mile visibility with 360-degree horizontal viewing angle and 180-degree vertical projection.
- Uses an accelerometer to detect the flare's orientation. This will automatically choose which set of LEDs to flash. Flares in horizontal position (lying on ground), side LEDs will flash. Vertical position (attached to vehicle), top LEDs will flash. The tilt sensor can be disabled.
- Magnetic base to allow mounting on vehicles, signs, cones, etc. Mounting flares on back of vehicle creates an effective light bar.
- Lock the flash to the top LEDs when the flares are lying horizontally on the ground and you can brightly illuminate a traditional cone.
- Five flash patterns to choose from. Four sequential patterns and one simultaneous pattern.
- Battery status check with a push of a button. No need to change batteries unnecessarily! Ask the flare its' battery state.
- Reverse the sequence direction with a push of a button. From any flare, the user can change the direction of the sequence. This can be done for deployment so that the user can drop the last flare in the sequence first, walk up stream towards traffic, and drop the first flare in the sequence last.
- "Endoskeleton" carrying case allows for quick and safe deployment/retrieval of flares. Leave the flares flashing while you collect and snap them onto the case. The flashing flares in your hand will make you visible to traffic as you return to your vehicle.
- Group frequency mode. Users now can change entire set of flares at one time. Using one flare, the user can program the set of flares to be any group.
Rechargeable System
24-30 HOURS OF CONTINUOUS FLASH All rechargeable sets include: Carrying/Charging case, DC car charger plug, AC wall charger plug Optional universal cone adapter allows the flare to be securely mounted on top of the cone. The cone adapter offers the flexibility to have the flare flash as a 360-degree cone lamp. Cone adapter has the option to mount flares on both sides. This allows for deployment of two sets of flares; directing traffic in both directions. -
Fully Punched Telespar Square Posts with 7/16" pre-punched holes on 1" centers are the standard against which all other signposts are measured. Precision manufactured from the highest-quality steel, Telespar posts are corner-welded to allow smooth telescoping action - a key to the system's versatility and ease of installation.- Easy, safe installation by hand or power
- Convenient sign mounting before installation
- Superior torsional strength
- Versatile, four-sided sign mounting at any height
- Fast, economical replacement of damaged sign posts
- FHWA-approved yielding capability
-
Fully Punched Telespar Square Posts with 7/16" pre-punched holes on 1" centers are the standard against which all other signposts are measured. Precision manufactured from the highest-quality steel, Telespar posts are corner-welded to allow smooth telescoping action - a key to the system's versatility and ease of installation.- Easy, safe installation by hand or power
- Convenient sign mounting before installation
- Superior torsional strength
- Versatile, four-sided sign mounting at any height
- Fast, economical replacement of damaged sign posts
- FHWA-approved yielding capability
-
Fully Punched Telespar Square Posts with 7/16" pre-punched holes on 1" centers are the standard against which all other signposts are measured. Precision manufactured from the highest-quality steel, Telespar posts are corner-welded to allow smooth telescoping action - a key to the system's versatility and ease of installation.- Easy, safe installation by hand or power
- Convenient sign mounting before installation
- Superior torsional strength
- Versatile, four-sided sign mounting at any height
- Fast, economical replacement of damaged sign posts
- FHWA-approved yielding capability
-
Fully Punched Telespar Square Posts with 7/16" pre-punched holes on 1" centers are the standard against which all other signposts are measured. Precision manufactured from the highest-quality steel, Telespar posts are corner-welded to allow smooth telescoping action - a key to the system's versatility and ease of installation.- Easy, safe installation by hand or power
- Convenient sign mounting before installation
- Superior torsional strength
- Versatile, four-sided sign mounting at any height
- Fast, economical replacement of damaged sign posts
- FHWA-approved yielding capability
-
Class 2 #1163- Comfortable Ultra-Cool™ 100% polyester mesh material on back with solid front.
- Zipper front closure.
- 2” wide high performance reflective material with 3” contrasting color.
- Left and right chest mic tabs.
- Two lower outside patch pockets with flaps.
- Right chest 2-tier, 4-division pocket.
- Left chest radio pocket with flap.
- Two lower inside patch pockets.
-
Class 2 #1191- 100% polyester mesh material with solid polyester pockets.
- Zipper front closure.
- 2” wide reflective material.
- Left chest mic tab.
- Two lower outside patch pockets with flaps.
- Right chest 2-division pocket.
- Left chest 4-division pocket.
- Two inside patch pockets.
-
12" LED Baton w/ 3-Way Switch (Steady Burn / Fast Flash / Off) w/ Belt Clip- Pulsating high intensity LED lights
- Water and impact resistant construction
- (2)C Batteries (not included)
-
12" Non-Reflective Orange Traffic Cone, 1.15lb -
Class 3 #1242- Ultra-Cool™ 100% polyester mesh with solid pockets.
- Zipper front closure.
- 2” wide high performance reflective material with 3” contrasting mesh.
- Left chest mic tab.
- Outside left chest radio pocket.
- Outside right chest 2-tier, 3-division pocket.
- Inside lower patch pockets.
- Two lower outside solid material patch pockets with flaps.
-
Fully Punched Telespar Square Posts with 7/16" pre-punched holes on 1" centers are the standard against which all other signposts are measured. Precision manufactured from the highest-quality steel, Telespar posts are corner-welded to allow smooth telescoping action - a key to the system's versatility and ease of installation.- Easy, safe installation by hand or power
- Convenient sign mounting before installation
- Superior torsional strength
- Versatile, four-sided sign mounting at any height
- Fast, economical replacement of damaged sign posts
- FHWA-approved yielding capability
-
Fully Punched Telespar Square Posts with 7/16" pre-punched holes on 1" centers are the standard against which all other signposts are measured. Precision manufactured from the highest-quality steel, Telespar posts are corner-welded to allow smooth telescoping action - a key to the system's versatility and ease of installation.- Easy, safe installation by hand or power
- Convenient sign mounting before installation
- Superior torsional strength
- Versatile, four-sided sign mounting at any height
- Fast, economical replacement of damaged sign posts
- FHWA-approved yielding capability
-
The Bernzomatic Propane Hand Torch Cylinder is designed to fuel hand torches in order to complete jobs. It can be used in small soldering jobs, softening putty and paint, removing rusty bolts and nuts, and thawing frozen locks. Constructed of durable steel, the slim, lightweight cylinder is easy to grip and maneuver. With a maximum flame temperature in air of 3,600 degrees Fahrenheit, you'll be able to use this cylinder for small jobs and continuing your work. Features:- Flame temperature of 3,600°F
- Constructed of durable steel for a lightweight and slim design
- CGA600 Connection
- 14.1 ounce capacity
-
- Light weight and balanced for less operator fatigue
- Best power-to-weight ratio in the industry
- Smooth start decompression valve reduces start up force by 70%
- 12" or 14" blade capacity models
- 5-stage filtration system
- Fully adjustable blade guard
- Water kit included with standard garden hose quick disconnect
- Powerful 73cc engine
- Includes: 4 bottles of Ultra-Extend synthetic oil...Makes 1 gallon - 50:1 ratio
-
Fully Punched Telespar Square Posts with 7/16" pre-punched holes on 1" centers are the standard against which all other signposts are measured. Precision manufactured from the highest-quality steel, Telespar posts are corner-welded to allow smooth telescoping action - a key to the system's versatility and ease of installation.- Easy, safe installation by hand or power
- Convenient sign mounting before installation
- Superior torsional strength
- Versatile, four-sided sign mounting at any height
- Fast, economical replacement of damaged sign posts
- FHWA-approved yielding capability
-
Fully Punched Telespar Square Posts with 7/16" pre-punched holes on 1" centers are the standard against which all other signposts are measured. Precision manufactured from the highest-quality steel, Telespar posts are corner-welded to allow smooth telescoping action - a key to the system's versatility and ease of installation.- Easy, safe installation by hand or power
- Convenient sign mounting before installation
- Superior torsional strength
- Versatile, four-sided sign mounting at any height
- Fast, economical replacement of damaged sign posts
- FHWA-approved yielding capability
-
Fully Punched Telespar Square Posts with 7/16" pre-punched holes on 1" centers are the standard against which all other signposts are measured. Precision manufactured from the highest-quality steel, Telespar posts are corner-welded to allow smooth telescoping action - a key to the system's versatility and ease of installation.- Easy, safe installation by hand or power
- Convenient sign mounting before installation
- Superior torsional strength
- Versatile, four-sided sign mounting at any height
- Fast, economical replacement of damaged sign posts
- FHWA-approved yielding capability
-
Fully Punched Telespar Square Posts with 7/16" pre-punched holes on 1" centers are the standard against which all other signposts are measured. Precision manufactured from the highest-quality steel, Telespar posts are corner-welded to allow smooth telescoping action - a key to the system's versatility and ease of installation.- Easy, safe installation by hand or power
- Convenient sign mounting before installation
- Superior torsional strength
- Versatile, four-sided sign mounting at any height
- Fast, economical replacement of damaged sign posts
- FHWA-approved yielding capability
-
Fully Punched Telespar Square Posts with 7/16" pre-punched holes on 1" centers are the standard against which all other signposts are measured. Precision manufactured from the highest-quality steel, Telespar posts are corner-welded to allow smooth telescoping action - a key to the system's versatility and ease of installation.- Easy, safe installation by hand or power
- Convenient sign mounting before installation
- Superior torsional strength
- Versatile, four-sided sign mounting at any height
- Fast, economical replacement of damaged sign posts
- FHWA-approved yielding capability
-
56.8 liter (15 US gallon) portable eye/face wash unit incorporating a stainless steel cylinder is capable of washing eyes and face simultaneously for up to 15 minutes. Featuring dust covers and push lever operation for ease of use. For decontamination of body parts subjected to minor contamination, an optional drench hose for eye, face and body washing can be fitted. Includes inspection tag for recording test and service history, ANSI complaint. -
Class 2 #1505B- Ultra-Cool™ 100% polyester mesh.
- Brilliant Trim reflective edging improves low light visibility.
- 5-point breakaway with breakaway sides, shoulders and front closure.
- 2” wide high performance reflective material.
- Left chest mic tab.
- Left chest radio pocket with hook and loop tabs.
- Inside lower left patch pocket.
- Inside right chest 2-tier, 4-division pencil pocket.
-
Class 3 #1552B- Ultra-Cool™ 100% polyester mesh material.
- Brilliant Trim reflective edging improves low light visibility.
- Hook & loop front closure reinforced with durable webbing.
- 5-point breakaway on shoulders, sides, and front closure.
- 2” wide high performance reflective material on 3” contrasting color.
- Left and right chest mic tabs.
- Two lapel grommets
- Outside right chest 2-tier, 4-division pocket.
- Outside left chest multi-use cell pocket.
- Inside lower patch pockets.
- Two lower outside cargo pockets with adjustable flaps and grommets
-
Class 3 #1565- 100% polyester mesh.
- Zipper front closure.
- 2″ wide reflective material with 3″ contrasting color.
- Left chest mic tab.
- Left chest pocket
- Available in lime & orange
-
Class 3 #1566- 100% polyester mesh.
- Zipper front closure.
- 2″ wide reflective material with 3″ contrasting color.
- Left chest mic tab.
- Left chest pocket
- Available in lime & orange
