-
24"x12" R9-11a Left / Right, DIBOND or ALUMNIUM Diamond Grade Pristmatic (DGP) -
R9-9 "SIDEWALK CLOSED", DIBOND or ALUMNIUM Diamond Grade Pristmatic (DGP) VDOT Standard Size: 30"x18" -
Radians Arctic Radwear Headbands are made with Advanced ARCTIC™ Technology that accelerates the evaporative cooling process. To activate, simply soak the band in water for 2-3 minutes. It can be worn for up to 5 hours of cooling relief, and can be re-activated at any time by soaking in water again. The unique stretch-fit spandex design allows the band to move with your body, not against it, allowing for optimum blood circulation, keeping you cooler and providing a noticeably more comfortable fit than standard headbands. The Arctic Radwear® Headband is designed to keep you cool during hot outdoor activities, such as construction work, tough workouts, or any strenuous outdoor or indoor activity.- Advanced ARCTIC™ Technology
- Stretch-fit design for better comfort
- Reusable, simply soak the band in water for 2-3 minutes then use
- One Size Fits All
- Available in Blue Western, Blue, Digital Camo, Lime, Red Western
-
CLICK HERE FOR SPECS- Dielectric snap fit temples.
- Sleek, lightweight design offers a comfortable fit.
- Optically correct and distortion free lenses.
- Economical dual wraparound 9.75 base lens provides near perfect orbital seal.
- Protective polycarbonate lens provides impact resistance.
- Safety Glass meets ANSI Z87.1+ standards and is assembled in the USA.
-
The Radians RWG11 Micro-Foam Nitrile Gripper Glove has a blended nylon/spandex shell. The elastic cuff provides a comfortable, slip-on fit while the micro-foam dipped palm with nitrile dots provides durability and an anti-slip grip. Size: S,M,L,XL,XXL -
The Radians RWG22 hi-vis work glove provides excellent protection from abrasion. The seamless design of the 13 gauge, polyester shell with the polyurethane dipped palm provides protection in wet or dry conditions and a comfortable fit in hazardous applications. Size XS,S,M,L,XL,XXL -
Radians SJ02B-3 Type R, Class 3, Long Sleeve Hooded Sweatshirt offers superior warmth while keeping you visible. Color blocking at the bottom conceals dirt. Radians SJ02B-3 Features:- Black elastic knit waistband and cuffs
- Low Piling Polyester fleece material
- Color blocking at the bottom
- 2” silver reflective tape
- Two lower pouch pockets
- Hood with adjustable pull cords
- Custom imprinting available on left chest and back center
- 25 Wash Max
- Meets ANSI/ISEA 107-2015 Standards
-
Radians SJ12 Class 3 weather proof Multi-Color Bomber Jacket with a quilted liner makes it very easy to slip on and off over other fleece or other warm outwear.- Quilted Liner 160g/m2
- 2" Silver Reflective Tape
- Multi-Color PU Coated Weather Proof 300D Oxford Polyester Shell
- Concealed Detachable Hood
- Elastic Waistband & Cuffs
- Zippered, Lined Slash Pockets
- 3D Flap Covered Cell Phone / Radio Chest Pocket
- One Inside Open Chest Pocket
- Mic Tabs on Both Shoulders
- Download Flyer
-
Radians SV2Z Economy Type R Class 2 Safety Vest with Zipper Closure is compliant protection at an economical price. Excellent choice for extreme work environments like asphalt paving that greatly reduce the useful life of a vest, or protection for short-term labor.- Closure: Zipper
- 2" silver tape reflective material, 1 horizontal stripe.
- Pockets: 1 upper left front, 1 lower right inside
- Materials: 100% polyester solid knit, 100% polyester mesh
- Meets ANSI/ISEA 107 Standards
-
Radians SV4X Economy Mesh Type R Class 2 Breakaway vest with X-Back tape configuration provides directional indication to inform on-coming traffic if workers are aware of a potential hazard. Features 5 point drop shoulder breakaway, with hook and loop fasteners at shoulders, sides and front that break away when pulled at moderate force. Excellent choice for transportation, railway and airport ramp work environments with machinery and equipment.- Closure: Hook & Loop.
- 2" Silver Tape Reflective Material. 1 horizontal stripe. 2 front vertical stripes. Rear x-back.
- 5 Point Breakaway - Shoulders, Sides and Front Closure.
- Materials: 100% Polyester Mesh.
- Pockets: 1 Chest pocket, 1 lower front pocket.
- Meets ANSI/ISEA 107 Standards.
- Meets Z96-15 CAN/CSA standards.
-
The Radians SV63W Two Tone Surveyor Type R Class 3 Vest is a short sleeved hi-viz safety vest perfect to be worn in daytime conditions. Contrast trim combinations make workers much more noticeable in low light and broad daylight. Very functional pocket configuration so you can carry the tools you need to do your job. Class 3 safety vests are designed to protect the worker with maximum visibility. These vests are designed with the most hi-viz material coverage and reflective stripes for workers exposed to complex work environments. Class 3 vests are required in environments with high-speed traffic, high-risk environments and where the worker must be visible through a full range of motions at a minimum of 1280 feet (390 meters). This vest is made to comfortably fit women so that snags are avoided. Radians SV63W Features:- Zipper Closure
- 2" Silver Tape Reflective Material. 1 horizontal stripe
- Contrasting Trim Detail
- Pockets: Upper Split Pad/Pencil, Upper Radio/Phone, 2 Each Lower Flap Covered, 2 Large Deep Open Inside, 1 Inside Flashlight
- MIC Tab on Both Shoulders
- Materials: 100% Polyester Solid Knit Front, 100% Polyester Mesh Back
- Meets ANSI/ISEA 107-2015 Standards
-
Available in: Carbon, White, Red, and Yellow FeaturesThe RADIX Non-Vented Safety Helmet is comfortable thanks to its four-point LUX Suspension system, which guarantees the helmet fits securely on the head. The magnetic quick-lock, adjustable chinstrap makes it ideal for working at height and on the ground. The unventilated outer shell protects against electrical hazards, molten metal splash, and flames. With its potential for integrating an ARCLIGHT headlamp, LIFT hearing protection, and multiple accessories, it is an entirely modular helmet, thus meeting the specific needs of multiple industries.CERTIFICATIONS: ANSI Z89.1, TYPE 2, CLASS E, Certified ANSI Type 2 standards, protects from side, front, and rear impacts- Brim grip, exclusive design provides a secure feel
- Oversized ratcheting fitment dial to adjust size is easy to grip and use with gloves on or off
- Integrated accessory clips with six (6) external built-in attachment points are compatible with a wide range of LIFT Accessories
- Microfiber antimicrobial internal liner assists with moisture-wicking and comfort and is easy to replace and wash
- Secure four-point connection with easy release magnetic lock
- One size fits most, Standard Head Size 6 ½ - 8 (52-64 cm head circumference)
Hard Hat WeightOur Safety Helmet weighs in at an average 502g grams with suspension.Application of UseWorking-at-heights, Lineworker, Confined Space, Heavy Industrial, Rescue, Electrical, Arborist and General Construction.Lifespan3 - 5 Year Average Liftspan: Hard hat lifespan may vary depending on the conditions of each work site. Hard hats subjected to more wear and tear or used outdoors in direct sunlight may need to be replaced more frequently. Daily inspections are the best way to determine when to replace a hard hat shell, suspension, or the entire unit. Suggested replacement is based on service life (Based on when the hard hat was placed into service, not the manufacture date). As a general guideline we recommend replacing hard hats every 3-5 years regardless of outside appearance, but this can vary due to use and job site conditions
Gainesville Branch
14490 Lee Hwy
Gainesville, VA 20155
(703) 753-7446
Tidewater Branch
4815 George Washington Memorial Hwy
Yorktown, VA 23692
(757) 879-6899
Fishersville Branch
24 Lucas Road
Fishersville, VA 22939
(540) 688-3327
Lorton Branch
8433A Backlick Rd
Lorton, VA 22079
(703) 339-0909
Capitol Heights Branch
9011 East Hampton Dr
Capitol Heights, MD 20743
(301) 395-5161
Baltimore Branch
8515 A Kelso Drive
Essex, MD 21221
(443) 233-6955
Copyright © Traffic Safety Supplies, Inc. Web design by Nashville web design company, All My Web Needs