Available in 6 ft.
-
Universal cone adapter allows the flare to be securely mounted on top of the cone. The cone adapter offers the flexibility to have the flare flash as a 360-degree cone lamp. Cone adapter has the option to mount flares on both sides. This allows for deployment of two sets of flares; directing traffic in both directions. -
- 6' long X 5.75" wide X 4" tall x 17lb.
- Available in Yellow, Gray, White, Handicapped Blue
- Includes three (3) Fasteners per block
- 100% Post Consumer Recycled Plastic Resin (LEED qualified), Made in USA
-
Maintenance FreeRecycled rubber- Won't chip, crack, or crumble
- Resistant to weather, oil, salt, moisture
- Protected from UV light
Blue Parking Stop Available- Use in handicap parking spots
Reflective stripes in yellow or white- Adds to visibility
Install on asphalt or concrete- Installation hardware sold separately
Made in the U.S.A. Hardware: For Asphalt - 14" x 1/2" rebar spike Dimensions: 72”L x 6”W x 4.5”H, 35.5 lbs. -
2" High Speed Bump- 6' long sections
- End caps sold separately
Textured surface- Grooved surface helps traction
8 Cat Eye Reflectors- Increased nighttime visibility
Performs well in extreme temperatures- Vulcanized rubber
- Flexible, conforms to surface
Molded-in yellow stripes- Synthetic rubber stripes won't degrade
- 5 stripes per section
Use in heavy traffic areasFor speeds 20 mph or less- Slows traffic to less than 5 mph
Bottom drainage channels- Protects wire, hose, or pipe to 3/4” dia.
Install on asphalt or concrete- Installation hardware sold separately
- For Asphalt - 14" x 1/2" rebar spike
-
Plyolastic is a rubberized asphalt emulsion crack filler formulated to be flexible and fast setting for use on asphalt pavements. This product provides a tough, resilient barrier against moisture for cracks up to 1/2″ in width Product Data Sheet -
Plyolastic is a rubberized asphalt emulsion crack filler formulated to be flexible and fast setting for use on asphalt pavements. This product provides a tough, resilient barrier against moisture for cracks up to 1/2″ in width Product Data Sheet -
This seamless glove features a 13-gauge high-visibility yellow/green HPPE fiber shell. The shell is enhanced by a polyurethane dipped palm. Each pair is individually packaged in a polybag.- 13-gauge high-visibility HPPE fiber shell offers great dexterity, breathability and ensures that hands will be easily seen
- Polyurethane dip provides superior grip and comfort
- Overcast color on hem for easy size identification
- Knit wrist cuff offers users a secure, comfortable fit and prevents gloves from slipping off during use
- Individually packaged
- ANSI/ISEA 105 Cut Level A4
- ASTM F2992-15 Results = 1,709 grams
- EN 388 Levels: 4X42D
-
A lightweight, full-frame style, the Pompano™ is a good choice for many face shapes. The sleek design features embedded TPR nose pieces and temple ends to ensure a comfortable and secure fit. This model features polarized, precision lenses, which filter out bent light waves reducing glare, eye fatigue, and decreasing reflection off surfaces such as water, sand, and snow. The BH27710PFT also features a PFT lens. Thanks to its chemical and physical properties, Performance Fog Technology is a permanent coating that prevents the formation of condensation on the lenses by absorbing the humidity drops. Lens: Red Mirror Performance Fog Technology Polarized Frame: Tortoise/Black Technology: All Bullhead Safety® Eyewear is made from 100% virgin materials. This style features lenses and frames constructed with the highest quality polycarbonate.- Polarized lenses filter out bent light waves eliminating glare, eye fatigue, and decreasing reflection off surfaces such as water, sand, and snow.
- Meets ANSI/ISEA Z87.1-2020 anti-fog properties standard
- TPR temple ends to prevent slipping
- Embedded TPR nose pieces to ensure eyewear stay put
- Polycarbonate construction for full ANSI-rated protection
- Meets ANSI/ISEA Z87.1 high impact standards
-
Operational Features- Full 8 ft. light elevation
- Collapsible aluminum extension mast with locking thumb screws and retractable cable - 24” collapsed height Rated 50,000 hours service on LED lamp head
- Push-to-test volt meter built into front panel
- 12-volt power port for quick charge from an external batter source or voltage out to run 12-volt devicesAdjustable directional lamp head(s)
- Weight: 35 lb
- 12 VDC sealed 33 amp AGM lead acid battery
- Deep cycle, with built-in 115 VAC charger system and cord
- Run time for Single LED with full charge, 32+ hours
- Run time for Dual LED with full charge, 16+ hours
- Battery pack rated for 500+ charge cycles
- Approved for continuous charging when light not in use. If fully depleted, it may require up to 24 hours to fully recharge
- One year replacement warranty on battery pack and charger
Designed to Meet National and State Flagger Illumination Regulations. Complies with NCHRP Report 476 Section 2.5.2 (Illumination, Visibility, and Temporary Lighting) and the MUTCD Section 6E.08
-
JUST GRIP, TIP & ROLL!- Fill with sand or water to withstand strong winds
- EZ-GRIP Finial, easier to grip the Tip-Roll sign
- Overall height 48"
- Accepts signs from 9"x12" to 24"x24" to 12"x36" and can handle 40+ mph winds with a filled base.
- Available in yellow, blue, and black. (Black in stock!)
- Mounting hardware included.
- Recessed wheels make stand easy to move
-
- Recycled rubber base 30 lbs. 18.5" x 18.5" x 2.5"H
- Plastic 60" white square sign post. More durable and stable than round sign posts. Has reinforcing internal cross bars.
- Center hole: 1.75" square
- See instructions for included hardware.
- Spec Sheet
- Made in USA
