- Colors: Yellow or White
- Reflective Material: Single or Double Sided
- Case Count: 500
-
TOMs are the most effective and convenient product on the market to provide short-term pavement markings that work effectively in both day and night. They are simple to place and easy to remove. They are durable enough for use on any road, from low volume to interstate highways. TOMs are manufactured with virgin engineering resins and the best retro-reflective tapes and adhesives. They are built tough to stand up to the demands of construction work zones. They are manufactured and stocked in two standard colors – white and yellow – and can be made reflective on one or both sides. All TOMs feature a factory-applied high tack butyl adhesive pad, that provides for "peel-and-stick" quick installation to the roadway. -
Built tough enough to handle any job, the Mud Hog® has been engineered for job site durability and ease-of-use. Load low and dump high to reduce labor fatigue while taking advantage of the triple-use mixer design. Mortar, grout, and concrete don't stand a chance as our patented system cuts through material with rubber blades on vertical paddles to prevent splashing - fully reversible to eliminate the issues of clogging found in other mixers. With a range of capacities and options to choose from, picking the right Mud Hog® has never been easier! -
- Extended auger tube saves several feet of boom extension on your forklift
- Grout from the scaffold side even easier and safer than before
- Simple, dependable, and time-saving
- No more lugging around 5 gallon buckets
- Only requires 2 people for complete masonry block fill; One to guide the hose, the other to drive the forklift
- Reach 17 feet of work area without moving the forklift with the unique swivel base
- Removable auger allows for clean-ups in under 15 minutes
- Field-tested in thousands of on-the-job applications
- Can also deliver sand and other dry materials
-
Tire Ring bases are designed to fit Traffic Drums and act as a weight to keep the drum firmly on the ground. Tire ring bases are sold separetly from drums. -
- 12-3/4"x10.5"
- Non-Reflective White Finish
- Easy to install on any standard traffic cone or delineators
- Available in White or Orange
- CUSTOM - Any wording
-
Seymour's Z-604 STRIPE Traffic Marking Machine is an easy-to-use solution for marking concrete and asphalt. The machine creates even 2"-4" lines, and from a standard 20 oz can, you can get get up to about 250' of length with the marker set at 4" wide. The design of the traffic marker makes it easy to manipulate, while providing extra space for refills. Now you don't need to keep running back to the truck when one can is empty. Change the can on the go. -
PRODUCT SHEET Ver-Mac’s ST-4815 Pro Series is a trailer-mounted arrowboard with 15 LED lamps. It features our innovative Single-Mast Design, V-Switch controller, Stealth Technology, OptiBright technology and is wired to integrate the Smart Arrowboard option. The unit combines energy-efficient design and high-quality construction to provide the most reliable, cost-effective and safe to operate arrowboard on the market. -
3 triangle reflectors per case Each triangle has a 4 lb weighted base Easy to erect, each triangle reflector unfolds from a weighted base -
Tru Tack Asphalt Joint Sealer and Tack Coat Asphalt joint sealer is a light application of asphalt (diluted asphalt emulsion) that acts as a bonding agent. It’s used to join old and new asphalt, prolonging the life of your asphalt repair. It’s a clean, efficient, and easy-to-use tack coat. We recommend using Tru Tack asphalt joint sealer in conjunction with all of our asphalt cold patches. Some of the applications or businesses that have used our tack coat include:- Asphalt maintenance contractors
- Government agencies
- Medical complexes
- Airports
- Universities and schools
- Departments of transportation
- Trucking and storage facilities
- And any business with a large parking lot!
-
Our VM-4815 is a 48 in x 96 in (1219 mm x 2438 mm) 15-light vehicle-mounted arrowboard. Our cigarette plug wireless V-Touch controller reduces installation time and costs. The V-Touch AB controller combined with the Auto Up/Down feature make programming safe, quick and easy. A variety of mounting options are available to meet your vehicle needs. -
Our TM-548 is a truck-mounted full-matrix message sign that is powered from the truck's battery. The TM-548 offers full graphic capability including several one touch arrow and directional display and sequencing functions. The TM-548 features the innovative V-Touch controller that plugs into the cigarette lighter and a manual up/down bracket. An optional wireless version of our V-Touch controller is available to save you time and and installation costs, and our powertilt mounting option will ease your work with our automated auto up/down feature. The TM-548 is ideal for highway stripping trucks, highway emergency and helper trucks. -
The pinch point crow bar is a 60-inch long straight heat-treated steel bar with a round tapered handle. This long hand tool is utilized to pry and lever heavy objects. The typical uses for an 18-pound crow bar include breaking up clay, concrete, and other hard materials. -
The Post Hole Digging Bar is used for digging and prying of dirt and large rocks and tamping soil. The tamper head is used to level ground around fence posts and deck supports. This tool has a durable design and is heat treated with quality carbon steel to withstand industrial use. -
-
Flash Rate: +/- 65 Times Per Minute
-
Power/Energy: 1.5 Watt Solar Panel/3.6 Volt 4600 mAh Battery Included/Installed
-
Illumination/Brightness: 9 High Intensity Super Bright LEDs; 35+ Candelas
-
Operational Requirements: Ready to Operate Right Out of the Box; All Parts Included; Maintenance Free
-
Length of Operation: 3+ Years
-
Full Solar Charge: Operates 168+ Hours Flashing
-
Overcharge: Protection Built-In
-
Charging Requirements: Re-Charges During Day; No Direct Sunlight Required to Charge
-
On/Off Switch: Operates 24/7 Flashing
-
Lens Cover Material: Polycarbonate
-
Mounting System: Box Style Base with Multiple Mounting Options Available
-
Packaging/Parts Included: 5 Lights Per Box (Fully Assembled); 5 Bolts; 5 Post U-Clamps; 5 Hoods; 1 Security Tool; 1 On/Off Push Pin
-
Colors Available: Amber/Yellow (In Stock); Red
-
-
PRODUCT SPECIFICATIONS Product: Type-A/C Dual Function Solar Powered Barricade Light Product Type: Traffic Safety Light Product #: DF002- Dual Function Mode: Flashing &/or Steady Burn Modes All-in-One
- Flash Rate: +/- 65 Times Per Minute
- Power/Energy: 0.4 Watt Solar Panel/2.4 Volt NiMH Rechargeable 1,600 mAh Battery Included/Installed
- Illumination/Brightness: 2 High-Intensity Super Bright LEDs; 9 Candelas Each
- Length of Operation: 3 to 5+ Years
- Lens Cover: 7" Polycarbonate Lens with Retro-Reflector Ring
- Mounting System: 180 Degree Swivel Box Base; Universal Mounting Bracket & Tool
- Full Solar Charge: Operates 336+ Hours (Flash Mode); 168+ Hours (Steady Mode)
- Charging Requirements: Re-Charges During Day; No Direct Sunlight Required to Charge
- On/Off Switch: Light Automatically Turns On at Dusk & Off at Dawn
- Packaging/Parts Included: 5 Lights Per Box (Fully Assembled); 5 Security Bolts; 1 Security Tool; 1 On/Off Push Pin
- Colors Available: Amber/Yellow; Red;
-
Traffic Safety Supplies U-Channel Sign Posts are manufactured from high quality, high tensile steel and finished with baked enamel paint or powder coating; also available in hot-dipped galvanized finish exceeding ASTM specifications. One person can install or replace a complete post and sign assembly in minutes. Delineator posts available in 1.33 #/ft or 1.12 #/ft in multiple lengths. FHWA accepted and NCHRP 350 approved. TSS U-Channel Posts are always in stock and ready to deliver to keep your job moving! -
Traffic Safety Supplies U-Channel Sign Posts are manufactured from high quality, high tensile steel and finished with baked enamel paint or powder coating; also available in hot-dipped galvanized finish exceeding ASTM specifications. One person can install or replace a complete post and sign assembly in minutes. Delineator posts available in 1.33 #/ft or 1.12 #/ft in multiple lengths. FHWA accepted and NCHRP 350 approved. TSS U-Channel Posts are always in stock and ready to deliver to keep your job moving! -
Traffic Safety Supplies U-Channel Sign Posts are manufactured from high quality, high tensile steel and finished with baked enamel paint or powder coating; also available in hot-dipped galvanized finish exceeding ASTM specifications. One person can install or replace a complete post and sign assembly in minutes. Delineator posts available in 1.33 #/ft or 1.12 #/ft in multiple lengths. FHWA accepted and NCHRP 350 approved. TSS U-Channel Posts are always in stock and ready to deliver to keep your job moving! -
Traffic Safety Supplies U-Channel Sign Posts are manufactured from high quality, high tensile steel and finished with baked enamel paint or powder coating; also available in hot-dipped galvanized finish exceeding ASTM specifications. One person can install or replace a complete post and sign assembly in minutes. Delineator posts available in 1.33 #/ft or 1.12 #/ft in multiple lengths. FHWA accepted and NCHRP 350 approved. TSS U-Channel Posts are always in stock and ready to deliver to keep your job moving! -
Traffic Safety Supplies U-Channel Sign Posts are manufactured from high quality, high tensile steel and finished with baked enamel paint or powder coating; also available in hot-dipped galvanized finish exceeding ASTM specifications. One person can install or replace a complete post and sign assembly in minutes. Delineator posts available in 1.33 #/ft or 1.12 #/ft in multiple lengths. FHWA accepted and NCHRP 350 approved. TSS U-Channel Posts are always in stock and ready to deliver to keep your job moving!
