Shop

  • Tru Tack Asphalt Joint Sealer and Tack Coat Asphalt joint sealer is a light application of asphalt (diluted asphalt emulsion) that acts as a bonding agent. It’s used to join old and new asphalt, prolonging the life of your asphalt repair. It’s a clean, efficient, and easy-to-use tack coat. We recommend using Tru Tack asphalt joint sealer in conjunction with all of our asphalt cold patches. Some of the applications or businesses that have used our tack coat include:
    • Asphalt maintenance contractors
    • Government agencies
    • Medical complexes
    • Airports
    • Universities and schools
    • Departments of transportation
    • Trucking and storage facilities
    • And any business with a large parking lot!
    Details
  • Aquaphalt is an eco-friendly material for patching asphalt and concrete road surfaces. Just pour into the pothole, water and tamp – easy as that! This product is used for repairing potholes, pavement damage, parking lots, utility cuts, tennis courts, walkways, bridge joints, manhole restorations and driveways. Aquaphalt is ranked #1 by Consumer Reports for asphalt patching materials. It’s easy to use and leaves you with a permanent repair.
    • Eco-friendly binder reacts and hardens with only water-no toxic solvents
    • Minimize roadway disruption with no need for special preparations
    • Lay directly from its container-no need to mobilize large crews and equipment
    • Material is a pre-mixed, just add water
    • Sets immediately, even in wet and cold conditions
    • You will actually save you time and money by eliminating costly repeat repairs
    • Can be sealed 24 hours after installation
    *Aquaphalt 6.0 is used for repairs 1 inch in depth or greater
    Details
  • PERMA-PATCH FINE MIX COLD PATCH PALLET -  (50) 60 LB BAGS / PALLET Perma-Patch Fine Mix is specifically formulated for Maintenance, Repair, and Operations (MRO) applications and warm-climate road repair.
    • Features finer aggregates enabling faster initial surface hardness with less compaction
    • Stiffer at any given temperature versus our regular mix
    • Excels in these maintenance and utility applications:
    • Low traffic areas such as parking lots
    • Shallow depressions
    • Sidewalk and ramp repairs
    • Cracks ¼ inch or wider
    Details
  • Details
  • 2" High Speed Bump
    • 6' long sections
    • End caps sold separately
    Textured surface
    • Grooved surface helps traction
    8 Cat Eye Reflectors
    • Increased nighttime visibility
    Performs well in extreme temperatures
    • Vulcanized rubber
    • Flexible, conforms to surface
    Molded-in yellow stripes
    • Synthetic rubber stripes won't degrade
    • 5 stripes per section
    Use in heavy traffic areas
    For speeds 20 mph or less
    • Slows traffic to less than 5 mph
    Bottom drainage channels
    • Protects wire, hose, or pipe to 3/4” dia.
    Install on asphalt or concrete
    • Installation hardware sold separately
    Hardware
    • For Asphalt - 14" x 1/2" rebar spike
    Dimensions: 72"W x 12"D x 2"H Weight: 52 lbs. Part Number: PAB-SP-26M End Cap Dimensions: 12"W x 6"D x 2"H Part Number: PAB-SP-26E
    Details
  • Available in 6 ft. 
    Maintenance Free
    Recycled rubber
    • Won't chip, crack, or crumble
    • Resistant to weather, oil, salt, moisture
    • Protected from UV light
    Blue Parking Stop Available
    • Use in handicap parking spots
    Reflective stripes in yellow or white
    • Adds to visibility
    Install on asphalt or concrete
    • Installation hardware sold separately
    Made in the U.S.A. Hardware: For Asphalt - 14" x 1/2" rebar spike Dimensions: 72”L x 6”W x 4.5”H, 35.5 lbs.
    Details
    • 6' long X 5.75" wide X 4" tall x 17lb.
    • Available in Yellow, Gray, White, Handicapped Blue
    • Includes three (3) Fasteners per block
    • 100% Post Consumer Recycled Plastic Resin (LEED qualified), Made in USA
    This product has multiple variants. The options may be chosen on the product page Details
  • Details
  • Features

    Unlike concrete or plastic, which necessitate frequent replacements, 100% recycled rubber wheel stops are safer and more durable. In-molded highway reflective tape (available in yellow or white) ensures visibility and pedestrian safety. Rubber wheel stops are pre-molded holes and can be shipped with anchoring spikes or lag bolts for installation. They are lightweight (34 lbs. for a 6' car stop) and flexible; conforming to the contour of uneven road surfaces.

    Also available in 22", 3', 4', and 6' lengths

    Available Colors: Black/Yellow, Black/White, and Blue/White https://checkers.justrite.com/media/flyer/Park-It_web.pdf
    This product has multiple variants. The options may be chosen on the product page Details
  • Details
  • Plyolastic is a rubberized asphalt emulsion crack filler formulated to be flexible and fast setting for use on asphalt pavements. This product provides a tough, resilient barrier against moisture for cracks up to 1/2″ in width Product Data Sheet
    Details
  • Gatormat is a blend of asphalt emulsion, high molecular weight acrylic polymer, graded rubber and fine ceramic aggregate designed to fill cracks on asphalt pavement surfaces Product Data Sheet 
    Details
Go to Top