-
Yellow or White View all Details -
Yellow or White View all details -
- 28" stainless steel wand with brass nozzle - for extended reach
- 3-stage filtration
- Combines higher pressure of a piston pump with extended life span of a diaphragm pump
- Double-thick shoulder straps - adds additional comfort
- Dual-displacement combination piston and diaphragm pump
- Large 6" ID cap opening - largest in the market
- Parts available for easy repairs
- Use with liquids and many wettable powders
- Viton formulation - increases durability
-
- Intelligent radio tech automatically positions flares in correct sequence for quick deployment.
- Any one flare controls entire network of flares. Changing a parameter such as pattern only requires the user to use one flare. That flare will send a message to the network of flares and will change their patterns as well. In addition, no need to turn off each flare. The user can do a "group off" from any flare and all the flares will turn off.
- 50+ foot range (15 meters) between flares (when on the ground), 1,000 feet (330 meters) when placed on top of a cone. No limit to the number of flares in a string.
- Rugged and compact, the flares can withstand the harsh environment of a roadway while stowing small in vehicle or motorcycle.
- "Moving" light is more effective at alerting and guiding drivers than random-flashing stationary patterns.
- 12 bright through-hole side LEDs, 4 bright surface mount top LEDs
- 1-mile visibility with 360-degree horizontal viewing angle and 180-degree vertical projection.
- Uses an accelerometer to detect the flare's orientation. This will automatically choose which set of LEDs to flash. Flares in horizontal position (lying on ground), side LEDs will flash. Vertical position (attached to vehicle), top LEDs will flash. The tilt sensor can be disabled.
- Magnetic base to allow mounting on vehicles, signs, cones, etc. Mounting flares on back of vehicle creates an effective light bar.
- Lock the flash to the top LEDs when the flares are lying horizontally on the ground and you can brightly illuminate a traditional cone.
- Five flash patterns to choose from. Four sequential patterns and one simultaneous pattern.
- Battery status check with a push of a button. No need to change batteries unnecessarily! Ask the flare its' battery state.
- Reverse the sequence direction with a push of a button. From any flare, the user can change the direction of the sequence. This can be done for deployment so that the user can drop the last flare in the sequence first, walk up stream towards traffic, and drop the first flare in the sequence last.
- "Endoskeleton" carrying case allows for quick and safe deployment/retrieval of flares. Leave the flares flashing while you collect and snap them onto the case. The flashing flares in your hand will make you visible to traffic as you return to your vehicle.
- Group frequency mode. Users now can change entire set of flares at one time. Using one flare, the user can program the set of flares to be any group.
Rechargeable System
24-30 HOURS OF CONTINUOUS FLASH All rechargeable sets include: Carrying/Charging case, DC car charger plug, AC wall charger plug Optional universal cone adapter allows the flare to be securely mounted on top of the cone. The cone adapter offers the flexibility to have the flare flash as a 360-degree cone lamp. Cone adapter has the option to mount flares on both sides. This allows for deployment of two sets of flares; directing traffic in both directions. -
An advanced version of our standard LED flare. It is slightly larger for double the light output and two rows of red LED lights. It does not produce a flame, smoke, or harmful bi-products and does not require batteries! Recharges so that it is ready for use when needed.- Kit includes (4) Super LED Road Flares, Charging Case, 120V Wall Charger, 12V Car Charger, & (2) Flex-Fit Tripods
- Each flare has 24 super bright LEDs that are visible up to 2 miles
- 7 flashing patterns including SOS Rescue (Morse Code)
- Intrinsically safe design with a rubber-tight seal (not certified)
- Powerful magnet to attach to metal surfaces
- Waterproof, crush proof, and corrosion proof
- U.S. DOT (FMCSA) 49 CFR 392.25 & 393.95 (g)
- MUTCD Type A (flashing) and Type C (solid on)
- NFPA 1901 Standards for Traffic Safety, Section 6.7.3 Miscellaneous Equipment.
-
- -1/4" Diamater
- -Pointed Tip for installation
- -High Quality!
- -Made of fiberglass making them more duarble than traditional wood markers
- Also available in lime green, red, and blue!
-
Part No.: 3013Weight: 305 lbs.Add versatility to your skid steer. Equipped with 42" class II forks, you can easily move around palletized materials. The high-visibility, see-through frame is ideal for operators.- 45 1/2" Wide
- 35 1/2" Tall
- 42" Class II Forks
- High Visibility See Through Frame
- 2800 lb. Weight Rating
-
The 50 person, large metal SmartCompliance 2021 ANSI A+ cabinet with over-the-counter medications is perfect for an industrial setting or a large corporate office. The unique cabinet design eliminates disorganized and missing supplies, while the clearly labeled compartments create a cabinet that is easy to use and restock. The expansion pocket allows you to customize your cabinet to meet your specific needs. -
- Cabinet is 2021 ANSI A+, Type I & II compliant
- 203 pieces sufficient to treat 50 or more people
- Easy-to-carry handle or wall mountable for quick access in an emergency
- SmartTab ezRefill System is a quick, easy, cost effective process for reordering and restocking
- Dispenser system reduces pilferage
- Easily accessible contents in a simple to maintain first aid system
- Consistent color-coded packaging matches ANSI recommendations for easy identification when the user needs to find a first aid supply to treat an injury
- FAO SafetyHub app helps you monitor usage to stay compliant and benchmark consumption. SafetyHub App will remind you when it's time to reorder while minimizing inventory costs.
- Ideal for industrial facilities or large corporate office
-
Item #505BU- Select split-cowhide for comfortable yet rugged service
- Continuous one-piece backs, leather welting in all vulnerable seams
- Full semi-sock thermal-knit cotton lining for comfort and added heat protection
- Kevlar® is a registered trademark of E.I. du Pont de Nemours and Company
-
The SteelMaster™ 50SM series is designed for rugged performance and durability without straining the budget.- Kick-release individully adjustable legs for stability on curbs and uneven terrain.
- Riveted anti-skid rubber leg caps.
- Designed to accommodate most roll-up and rigid signs.
- Metal flag holder.
- Orange for increased visibility.
- 63”x11”x8.25” (HXWXD)
- 34lb
- 97” Deployed Height
- Roll-Up Sign Height: 48 sign: 12” – 63” (from ground)
- Rigid Sign Height: 48” sign: 12” – 24” (from ground)
- Dual WindMaster Springs
-
- Intelligent radio tech automatically positions flares in correct sequence for quick deployment.
- Any one flare controls entire network of flares. Changing a parameter such as pattern only requires the user to use one flare. That flare will send a message to the network of flares and will change their patterns as well. In addition, no need to turn off each flare. The user can do a "group off" from any flare and all the flares will turn off.
- 50+ foot range (15 meters) between flares (when on the ground), 1,000 feet (330 meters) when placed on top of a cone. No limit to the number of flares in a string.
- Rugged and compact, the flares can withstand the harsh environment of a roadway while stowing small in vehicle or motorcycle.
- "Moving" light is more effective at alerting and guiding drivers than random-flashing stationary patterns.
- 12 bright through-hole side LEDs, 4 bright surface mount top LEDs
- 1-mile visibility with 360-degree horizontal viewing angle and 180-degree vertical projection.
- Uses an accelerometer to detect the flare's orientation. This will automatically choose which set of LEDs to flash. Flares in horizontal position (lying on ground), side LEDs will flash. Vertical position (attached to vehicle), top LEDs will flash. The tilt sensor can be disabled.
- Magnetic base to allow mounting on vehicles, signs, cones, etc. Mounting flares on back of vehicle creates an effective light bar.
- Lock the flash to the top LEDs when the flares are lying horizontally on the ground and you can brightly illuminate a traditional cone.
- Five flash patterns to choose from. Four sequential patterns and one simultaneous pattern.
- Battery status check with a push of a button. No need to change batteries unnecessarily! Ask the flare its' battery state.
- Reverse the sequence direction with a push of a button. From any flare, the user can change the direction of the sequence. This can be done for deployment so that the user can drop the last flare in the sequence first, walk up stream towards traffic, and drop the first flare in the sequence last.
- "Endoskeleton" carrying case allows for quick and safe deployment/retrieval of flares. Leave the flares flashing while you collect and snap them onto the case. The flashing flares in your hand will make you visible to traffic as you return to your vehicle.
- Group frequency mode. Users now can change entire set of flares at one time. Using one flare, the user can program the set of flares to be any group.
Rechargeable System
24-30 HOURS OF CONTINUOUS FLASH All rechargeable sets include: Carrying/Charging case, DC car charger plug, AC wall charger plug Optional universal cone adapter allows the flare to be securely mounted on top of the cone. The cone adapter offers the flexibility to have the flare flash as a 360-degree cone lamp. Cone adapter has the option to mount flares on both sides. This allows for deployment of two sets of flares; directing traffic in both directions. -
Our Professional Series Low Profile Long Bottom Tooth Buckets are made with a universal skid steer mounting plate that can also accomodate the Case 1840 and Case 1845C mounting. These buckets are made to give you a bucket with a better degree of rollback angle and also to enhance visability even more that the standard low profile buckets we offer. We can add weld-on shanks with pin-on teeth or you may choose a tooth-bar to take on and off as needed. We put wear bars under the bucket (so you don't wear out the bottom), reinforce the sides with 3/8 inch and put a 3/4 inch x 6 inch cutting edge with heavy duty weld on shanks and pin on teeth. All of our Buckets are now powder coated for a long lasting finish!- Width: 66 in
- Height: 21 in
- Length: 35.8 in
- Weight: 485 lbs
- SAE Heaped Capacity: 17.8 cu ft
-
Part No.: 3017Weight: 270 lbs.Need a better bucket for your skid steer? The general purpose 66" Smooth Bucket features a longer bottom than industry standard for better visibility. The rolled rear bottom adds strength and makes clean-up easier, while the wide 6” cutting edge ensures years of reliable performance. If you need a bucket for your skid steer, then the 66" Smooth Bucket is the obvious choice!- 1/2" x 6" Cutting Edge
- 10-Gauge Wrap
- 0.46 Cubic Yard Capacity
- 66" Wide
-
Part No.: 3022Weight: 535 lbs.If you need to move around brush or small logs, then the 72" HD Two-Cylinder Brush Grapple is the perfect attachment for your skid steer. This heavy-duty brush grapple is made from tough 1/2" steel and comes with dual top clamps for irregular-sized loads. The 72" HD Two-Cylinder Brush Grapple allows you to quickly and easily clear brush and other debris from a jobsite. Brush doesn’t stand a chance against this fearsome skid steer attachment!- 1/2" All-Steel Construction
- Dual Top Clamps for irregular-sized loads
- Dual Cylinder Covers
- 72" Wide
-
Our Professional Series Low Profile Long Bottom Tooth Buckets are made with a universal skid steer mounting plate that can also accomodate the Case 1840 and Case 1845C mounting. These buckets are made to give you a bucket with a better degree of rollback angle and also to enhance visability even more that the standard low profile buckets we offer. We can add weld-on shanks with pin-on teeth or you may choose a tooth-bar to take on and off as needed. We put wear bars under the bucket (so you don't wear out the bottom), reinforce the sides with 3/8 inch and put a 3/4 inch x 6 inch cutting edge with heavy duty weld on shanks and pin on teeth. All of our Buckets are now powder coated for a long lasting finish!- Width: 72 in
- Height: 21 in
- Length: 35.8 in
- Weight: 525 lbs
- SAE Heaped Capacity: 19.3 cu ft
-
Part No.: 3018Weight: 280 lbs.Need a better bucket for your skid steer? The general purpose 72" Smooth Bucket features a longer bottom than industry standard for better visibility. The rolled rear bottom adds strength and makes clean-up easier, while the wide 6" cutting edge ensures years of reliable performance. If you need a bucket for your skid steer, then the 72" Smooth Bucket is the obvious choice!- 1/2" x 6" Cutting Edge
- 10-Gauge Wrap
- 0.5 Cubic Yard Capacity
- 72" Wide
-
- Two head mounted pulleys
- Adjustable to 55" to 91" working height, with 6" adjustments
- 60' Retrieval SRL w/ galvanized cable
- Includes 7297 60' Personnel Winch with 3/16" galvanized steel cable
- Includes storage bags
-
Part No.: 3023Weight: 545 lbs.If you need to move around brush or small logs, then the 78" HD Two-Cylinder Brush Grapple is the perfect attachment for your skid steer. This heavy-duty brush grapple is made from tough 1/2" steel and comes with dual top clamps for irregular-sized loads. The 78" HD Two-Cylinder Brush Grapple allows you to quickly and easily clear brush and other debris from a jobsite. Brush doesn’t stand a chance against this fearsome skid steer attachment!- 1/2" All-Steel Construction
- Dual Top Clamps for irregular-sized loads
- Dual Cylinder Covers
- 78" Wide
-
Part No.: 3003Weight: 395 lbs.For year-round versatility, there is no better attachment for your skid steer than a 78" Snow/Mulch Bucket. Constructed from high-tensile steel, this bucket has high sides for maximum capacity and a rolled rear bottom for added strength and easier cleanup. The 78" Snow/Mulch Bucket easily scoops up and moves dirt, mulch, snow, gravel and more!- 1/8" Grade 50 High-Tensile Steel construction
- 1/2" x 6" cutting edge
- 1.0 Cubic Yard Capacity
- 78" Wide
-
Part No.: 3019Weight: 290 lbs.Need a better bucket for your skid steer? The general purpose 78" Smooth Bucket features a longer bottom than industry standard for better visibility. The rolled rear bottom adds strength and makes clean-up easier, while the wide 6" cutting edge ensures years of reliable performance. If you need a bucket for your skid steer, then the 78" Smooth Bucket is the obvious choice!- 1/2" x 6" Cutting Edge
- 10-Gauge Wrap
- 0.56 Cubic Yard Capacity
- 78" Wide
-
Class 2 #7803- ANSI/ISEA 107-2010 | Type R, Class 2
- Polyester Mesh Material
- Zippered Front Closure
- Dual Front Pockets
- Solid Reflective Striping
- Clinched Waist for Secure and Comfortable Fit
-
Class 2 #7805 Lime / #7806 Pink A cool and comfortable mesh vest specially designed for the woman in the field. Complete with vibrant hi-vis lime and neon pink in contrasting colors to ensure you stand out and stay safe. ANSI Class 2 compliance never looked so good.- ANSI/ISEA 107-2010 | Type R, Class 2
- 100% Polyester Mesh Material
- Zippered Front Closure
- 2 Slash Pockets
- Contrasting Reflective Stripes
- Available in Lime or Pink
- Drawstring Adjustable Waist
Gainesville Branch
14490 Lee Hwy
Gainesville, VA 20155
(703) 753-7446
Tidewater Branch
4815 George Washington Memorial Hwy
Yorktown, VA 23692
(757) 879-6899
Fishersville Branch
24 Lucas Road
Fishersville, VA 22939
(540) 688-3327
Lorton Branch
8433A Backlick Rd
Lorton, VA 22079
(703) 339-0909
Capitol Heights Branch
9011 East Hampton Dr
Capitol Heights, MD 20743
(301) 395-5161
Baltimore Branch
8515 A Kelso Drive
Essex, MD 21221
(443) 233-6955
Copyright © Traffic Safety Supplies, Inc. Web design by Nashville web design company, All My Web Needs