Available in 6 ft.
-
Additional Information Spec Sheet Stop Sign for Parking Lot Applications The 5’ Stop Sign was designed for use in parking lots and other areas not covered by statutory requirements. It is a flexible sign post for areas prone to occasional vehicle impacts. The 5' Stop Sign comes standard with our patented anti-twist reactive spring system that will ensure the sign will stay in place after impact. -
- 28.1 cc professional-grade, 2-stroke engine provides exceptional power
- Cushioned left hand grip easily adjusts to desired operator hand position
- Cushioned throttle control and grip assembly
- Vibration-reducing mounting absorbs engine vibration for greater operator comfort
- All power sources and attachments include heavy-duty cable drive shafts
- Quick change coupler makes attachment transition a quick and easy task
-
Traditional styling with a 10 base curve single mold lens and rubber temple sleeves makes the Pavon® ideal for any job. The wrap style affords maximum protection and full 180-degree peripheral acuity. Lens: Clear Frame: Frosted Clear Technology: All Bullhead Safety® Eyewear is made from 100% virgin materials. This style features lenses and frames constructed with the highest quality polycarbonate.- Lightweight design
- Integrated nosepiece
- Soft, non-slip TPR temple ends
- Meets ANSI/ISEA Z87.1 high impact standards
-
Traditional styling with a 10 base curve single mold lens and rubber temple sleeves makes the Pavon® ideal for any job. The wrap style affords maximum protection and full 180-degree peripheral acuity. Lens: Smoke Frame: Frosted Black Technology: All Bullhead Safety® Eyewear is made from 100% virgin materials. This style features lenses and frames constructed with the highest quality polycarbonate.- Lightweight design
- Integrated nosepiece
- Soft, non-slip TPR temple ends
- Meets ANSI/ISEA Z87.1 high impact standards
-
Part Number Description MAAKTFB33-1W White DG Barrier Marker MAAKTFB33-1A Amber DG Barrier Marker Reflective sheeting available on 1 or 2 sides, other sheeting options available
Size : 3"x3"
-
Pedestal Base - cast iron sign post base which attaches to concrete using anchor bolts; for 2" square posts- Three slotted anchoring holes in circular base
- Two set screws positioned on the neck of the base
- Drain grooves on the underside of bottom
- Hot dipped galvanized finish
-
Item #HR9000VIS- Contoured hand form reduces hand fatigue
- Great dexterity compared to natural leather gloves
- 3M™ Scotchlite™ reflective stripe for low-light visibility
- Griptex gripping material on the padded palm and fingertips
-
PERMA-PATCH FINE MIX COLD PATCH PALLET - (50) 60 LB BAGS / PALLET Perma-Patch Fine Mix is specifically formulated for Maintenance, Repair, and Operations (MRO) applications and warm-climate road repair.- Features finer aggregates enabling faster initial surface hardness with less compaction
- Stiffer at any given temperature versus our regular mix
- Excels in these maintenance and utility applications:
- Low traffic areas such as parking lots
- Shallow depressions
- Sidewalk and ramp repairs
- Cracks ¼ inch or wider
-
Permanent Work Zone Signs meant to be installed on posts for an extended amount of time. Aluminum or dibond signage with DGP sheeting meet all FHWA MUTCD standards. -
Universal cone adapter allows the flare to be securely mounted on top of the cone. The cone adapter offers the flexibility to have the flare flash as a 360-degree cone lamp. Cone adapter has the option to mount flares on both sides. This allows for deployment of two sets of flares; directing traffic in both directions. -
- 6' long X 5.75" wide X 4" tall x 17lb.
- Available in Yellow, Gray, White, Handicapped Blue
- Includes three (3) Fasteners per block
- 100% Post Consumer Recycled Plastic Resin (LEED qualified), Made in USA
-
Maintenance FreeRecycled rubber- Won't chip, crack, or crumble
- Resistant to weather, oil, salt, moisture
- Protected from UV light
Blue Parking Stop Available- Use in handicap parking spots
Reflective stripes in yellow or white- Adds to visibility
Install on asphalt or concrete- Installation hardware sold separately
Made in the U.S.A. Hardware: For Asphalt - 14" x 1/2" rebar spike Dimensions: 72”L x 6”W x 4.5”H, 35.5 lbs. -
2" High Speed Bump- 6' long sections
- End caps sold separately
Textured surface- Grooved surface helps traction
8 Cat Eye Reflectors- Increased nighttime visibility
Performs well in extreme temperatures- Vulcanized rubber
- Flexible, conforms to surface
Molded-in yellow stripes- Synthetic rubber stripes won't degrade
- 5 stripes per section
Use in heavy traffic areasFor speeds 20 mph or less- Slows traffic to less than 5 mph
Bottom drainage channels- Protects wire, hose, or pipe to 3/4” dia.
Install on asphalt or concrete- Installation hardware sold separately
- For Asphalt - 14" x 1/2" rebar spike
-
Plyolastic is a rubberized asphalt emulsion crack filler formulated to be flexible and fast setting for use on asphalt pavements. This product provides a tough, resilient barrier against moisture for cracks up to 1/2″ in width Product Data Sheet -
Plyolastic is a rubberized asphalt emulsion crack filler formulated to be flexible and fast setting for use on asphalt pavements. This product provides a tough, resilient barrier against moisture for cracks up to 1/2″ in width Product Data Sheet -
This seamless glove features a 13-gauge high-visibility yellow/green HPPE fiber shell. The shell is enhanced by a polyurethane dipped palm. Each pair is individually packaged in a polybag.- 13-gauge high-visibility HPPE fiber shell offers great dexterity, breathability and ensures that hands will be easily seen
- Polyurethane dip provides superior grip and comfort
- Overcast color on hem for easy size identification
- Knit wrist cuff offers users a secure, comfortable fit and prevents gloves from slipping off during use
- Individually packaged
- ANSI/ISEA 105 Cut Level A4
- ASTM F2992-15 Results = 1,709 grams
- EN 388 Levels: 4X42D
-
A lightweight, full-frame style, the Pompano™ is a good choice for many face shapes. The sleek design features embedded TPR nose pieces and temple ends to ensure a comfortable and secure fit. This model features polarized, precision lenses, which filter out bent light waves reducing glare, eye fatigue, and decreasing reflection off surfaces such as water, sand, and snow. The BH27710PFT also features a PFT lens. Thanks to its chemical and physical properties, Performance Fog Technology is a permanent coating that prevents the formation of condensation on the lenses by absorbing the humidity drops. Lens: Red Mirror Performance Fog Technology Polarized Frame: Tortoise/Black Technology: All Bullhead Safety® Eyewear is made from 100% virgin materials. This style features lenses and frames constructed with the highest quality polycarbonate.- Polarized lenses filter out bent light waves eliminating glare, eye fatigue, and decreasing reflection off surfaces such as water, sand, and snow.
- Meets ANSI/ISEA Z87.1-2020 anti-fog properties standard
- TPR temple ends to prevent slipping
- Embedded TPR nose pieces to ensure eyewear stay put
- Polycarbonate construction for full ANSI-rated protection
- Meets ANSI/ISEA Z87.1 high impact standards
-
Operational Features- Full 8 ft. light elevation
- Collapsible aluminum extension mast with locking thumb screws and retractable cable - 24” collapsed height Rated 50,000 hours service on LED lamp head
- Push-to-test volt meter built into front panel
- 12-volt power port for quick charge from an external batter source or voltage out to run 12-volt devicesAdjustable directional lamp head(s)
- Weight: 35 lb
- 12 VDC sealed 33 amp AGM lead acid battery
- Deep cycle, with built-in 115 VAC charger system and cord
- Run time for Single LED with full charge, 32+ hours
- Run time for Dual LED with full charge, 16+ hours
- Battery pack rated for 500+ charge cycles
- Approved for continuous charging when light not in use. If fully depleted, it may require up to 24 hours to fully recharge
- One year replacement warranty on battery pack and charger
Designed to Meet National and State Flagger Illumination Regulations. Complies with NCHRP Report 476 Section 2.5.2 (Illumination, Visibility, and Temporary Lighting) and the MUTCD Section 6E.08
-
JUST GRIP, TIP & ROLL!- Fill with sand or water to withstand strong winds
- EZ-GRIP Finial, easier to grip the Tip-Roll sign
- Overall height 48"
- Accepts signs from 9"x12" to 24"x24" to 12"x36" and can handle 40+ mph winds with a filled base.
- Available in yellow, blue, and black. (Black in stock!)
- Mounting hardware included.
- Recessed wheels make stand easy to move
-
- Recycled rubber base 30 lbs. 18.5" x 18.5" x 2.5"H
- Plastic 60" white square sign post. More durable and stable than round sign posts. Has reinforcing internal cross bars.
- Center hole: 1.75" square
- See instructions for included hardware.
- Spec Sheet
- Made in USA
-
Specifications: 72lb x 18"D, x 14"H Sign Base w/ a 1-3/4"x5' Square Post - IN STOCK!- 18″ Diameter
- 14″ Height, Conical Shape
- 72 lbs per sign base – under OSHA’s 75 lbs occupational limit
- Extra base weight available
- Base supports signs up to 24″ in diameter – add base weight for larger signs.
- American Recycled Scrap Tire Crumb Rubber – SBR with polyurethane binder
- Available with round or square post hole
- Made in the USA with 100% American recycled rubber – complies with ARRA 2009 and Buy America Acts
- Portable Sign Base Spec Sheet
- Sign Base Weight Spec Sheet
-
- 2'' silver reflective tape
- Pack away detachable hood
- Hook and loop adjustable cuffs
- Quilt lined
- Pockets: 2 side zipper, 1 internal patch, 1 cell phone
- Adjustable draw cord at side seams for closer fit
- Stormflap with zipper and hook and loop closure
- Waterproof with sealed seams
- EN ISO 20471 Class 3
- EN 343:2019 Class 3:1 X WP 15,000mm
- ANSI/ISEA 107-2015 TYPE R CLASS 3
-
- N95 approved offering protection against a wide range of non-oily particles Provides 95% NIOSH filtration efficiency Cup style for maximized inner space Ultrasonic welded head straps for greater durability
Standards
- NIOSH N95
- EN 149 FFP2 NR
-
P201 - N95 Valved Cup Respirator Collection: Disposable Mask FFP2 Range: Disposable Masks Materials: PP, EVA Foam Inner Pack: 10 Outer Carton: 30 Product information: N95 approved offering protection against a wide range of non-oily particles Provides 95% NIOSH filtration efficiency Cup style for maximized inner space Exhalation valve to reduce heat and humidity whilst offering lighter breathing resistance. Disposable Mask FFP2: Disposable mask FFP2 level, protects against solid and liquid particles of average toxicity. Minimal % of filtration 94%. Protects up to 10 times the TLV (Assigned Protection Factor for FFP2 masks). Examples of applications: Sanding of soft wood, composite materials, rust, putty, plaster, plastics /cutting, deburring, grinding, drilling of metal. Our Biztex brand ensures exceptional quality and performance across our full range of disposable masks. Disposable Masks: Our Biztex™ brand ensures exceptional quality and performance across our full range of disposable masks. The extensive Biztex™ range offers a high level of protection and quality safeguarding the wearer against many workplace risks including liquid chemicals, static electricity, dry particles and radioactive contamination. Standards: NIOSH N95 EN 149 FFP2 (NR) Features ● 95% filtration efficiency against a wide range of non-oily particles ● High performance exhalation valve to reduce heat and provide comfort when used in hot and humid conditions ● Adjustable nose bar for improved fit and reduced fogging of glasses ● Ultrasonic welded head straps ● Foam padding around the nose bridge for additional comfort ● Large inner space to help the user to breathe more easily ● Retail box which aids presentation for retail sales ● Comfortable cup style respirator ● Ideal for all day use ● 100% latex free ● CE-CAT III -
- This rechargeable torch is compact and lightweight. The beam distance and focus is adjustable with a twistable lens system.
- This torch can also be used as a back up USB phone charger with enough power for one full charge of your phone.
-
- Sizes – Small – 4X-Large
- Color – Yellow/Black with 2.5" Hi-Vis Tex Pro Silver Reflective Striping
- ANSI Class – 3
- Material – 94% Polyester, 6% Elastane, 4.5 oz Laminated with 100% Polyester Micro Polar Fleece, 4.5 oz, Total Weight – 9 oz
- Pockets – 5
- Mic Tabs – 2
- Detachable – ID Pocket
- Closure Style – Zipper Front
- Waist Style – Drawcord Adjustable Curved Back Hem
- Wrist Style – Elastic
- Collar Style – Contrast Fleece
- Meets –
- EN ISO 20471 Class 3
- ANSI/ISEA 107-2015 Type R Class 3
-
- ANSI/ISEA 107-2015 TYPE R CLASS 3 (Size L upwards)
- ANSI/ISEA 107-2015 TYPE R CLASS 2 (Sizes S & M)
- 2" silver heat seal reflective tape
- 65% Polyester, 35% Cotton 300g
- 2 front slash pockets
- Black bottom torso and cuffs
- Adjustable hood
- Elasticated rib waistband and cuffs
- 9 oz. 65% polyester and 35% cotton, for extra comfort.
- Available in sizes SM-6X.
-
- ANSI/ISEA 107-2015 | Type R, Class 3
- Reflective tape for increased visibility
- Removable sleeves
- Detachable collar
- ID pocket, security sleeve pocket and contrast black panels.
- CE certified
- Waterproof with taped seams preventing water penetration
- Faux fur liner and collar provide multi-way options for the wearer
- 7 pockets for ample storage
- Phone pocket
- Zipped pockets
- Two-way zip for quick and easy access
- Storm flap front to protect against the elements
- Concealed detachable hood
- Hook and loop cuffs for a secure fit
- Elasticated cuffs for a secure fit
- 50+ UPF rated fabric to block 98% of UV rays
-
- Sizes – Small – 6X-Large
- Color – Yellow/Black with 2” Silver and 3” Orange Reflective Striping
- Material – 100% Polyester, 300D Oxford Weave, PU Coated 5.5 oz
- Class – 3
- Lining – Quilt
- Pockets – 4
- Mic Tabs – 2
- Closure Style – Zipper Front
- Waist Style – Elastic
- Wrist Style – Adjustable
- Hood Style – Pack Away Adjustable
- Waterproof with Sealed Seams
- Meets –
- EN ISO 20471 Class 3
- EN 343:2019 Class 3:1 X WP 15,000mm
- ANSI/ISEA 107-2015 Type R Class 3
-
- Sizes – Small – 6X-Large
- Color – Yellow/Black with 2" Silver Reflective Striping and 4” Orange Contrasting Striping
- ANSI Class – 3
- Material – 100% Polyester with 300D Oxford Weave with a Stain Resistant Finish, 5.5 oz
- Coating – Polyurethane
- Lining – Quilt
- Pockets – 4
- Mic Tabs – 2
- Closure Style – Zipper and Snap Front with Storm Flap
- Wrist Style – Elastic
- Hood Style – Pack Away Adjustable
- Waterproof with Sealed Seams
- 50+ UPF Rated Fabric to Block 98% of UV Rays
- Meets –
- ANSI/ISEA 107-2015 Type R Class 3
- EN 343:2019 Class 3:1 X WP 15,000 mm
-
- 2" silver reflective tape
- High performing breathable, wind, and water resistant fabric
- Pockets: 1 chest, 2 side, 1 cell phone
- Center front zipper with stormflap to protect against the elements
- Contrast panels for protection against dirt
- Hook and loop adjustable cuffs
- 94% Polyester, 6% Elastane, 4.5oz laminated with 100% Polyester Micro Polar Fleece, 4.5oz
- ANSI/ISEA 107-2015 Type R Class 3
-
- Hi Vis Jacket
- 100% Polyester
- Adjustable Hood
- Hook and Loop Adjustable Cuffs
- 4 Outer Pockets, 3 Inner Pockets
- Contrast Panel
- Waterproof
- Sealed Seams
- ANSI/ISEA 107-2015
- Type R - Class 3
