- Width: 81 in
- Height: 21 in
- Length: 35.8 in
- Weight: 579 lbs
- SAE Heaped Capacity: 22.8 cu ft
- 6'L Plastic barricade
- Double wall, thick panel
- Sturdy and durable
-
Our Professional Series Low Profile Long Bottom Tooth Buckets are made with a universal skid steer mounting plate that can also accomodate the Case 1840 and Case 1845C mounting. These buckets are made to give you a bucket with a better degree of rollback angle and also to enhance visability even more that the standard low profile buckets we offer. We can add weld-on shanks with pin-on teeth or you may choose a tooth-bar to take on and off as needed. We put wear bars under the bucket (so you don't wear out the bottom), reinforce the sides with 3/8 inch and put a 3/4 inch x 6 inch cutting edge with heavy duty weld on shanks and pin on teeth. All of our Buckets are now powder coated for a long lasting finish! -
Part No.: 3004Weight: 415 lbs.For year-round versatility, there is no better attachment for your skid steer than a 84" Snow/Mulch Bucket. Constructed from high-tensile steel, this bucket has high sides for maximum capacity and a rolled rear bottom for added strength and easier cleanup. The 84" Snow/Mulch Bucket easily scoops up and moves dirt, mulch, snow, gravel and more!- 1/8" Grade 50 High-Tensile Steel construction
- 1/2" x 6" cutting edge
- 1.12 Cubic Yard Capacity
- 84" Wide
-
9" LED Baton w/ 3-Way Switch (Steady Burn / Fast Flash / Off) w/ Belt Clip- Pulsating high intensity LED lights
- Water and impact resistant construction
- (2)C Batteries (not included)
-
Part No.: 3006Weight: 445 lbs.For year-round versatility, there is no better attachment for your skid steer than a 96" Snow/Mulch Bucket. Constructed from high-tensile steel, this bucket has high sides for maximum capacity and a rolled rear bottom for added strength and easier cleanup. The 96" Snow/Mulch Bucket easily scoops up and moves dirt, mulch, snow, gravel and more!- 1/8" Grade 50 High-Tensile Steel construction
- 1/2" x 6" cutting edge
- 1.28 Cubic Yard Capacity
- 96" Wide
-
Guardsafe 36 Barriers- Will not crumble or break after multiple deployments like concrete barriers.
- Create continuous lines or curves angled up to 90º with an easy to use swivel pin design
- Molded-in recessed handles make for easy handling.
- Large, threaded top fill-port and dual bottom drain plugs make it easy to load and unload with sand or water ballast.
- Two molded-in pockets on top of barrier accept standard blinking lights.
- Flat side surfaces easily accept reflective striping.
- Durable polyethylene construction stands up to harsh weather conditions and resists cracks and dents upon impact.
- High resistance to sunlight and ultraviolet radiation means the product stays in service longer.
- Lightweight design makes handling easy.
- Technical Spec Drawings
- Spec Sheet
- Brochure
Standard Colors:
Natural Ora
-
Our Type III Barricades are made from versatile galvanized square tubing for both skids and uprights. The skids are connected to the uprights by a stub weld base receiver. The panels are available in lengths of 4 ft., 6 ft., 8 ft., 10 ft., and 12 ft. Reflective sheeting is available in 3M™ Diamond Grade, High Intensity Prismatic, or Engineer Grade Prismatic on one or both sides. Assembly Required. -
- Plastic legs with rubber feet
- Rubber feet are securely attached
- Made of recycled rubber
- Feet rotate for stacking
- Stacking lugs on panels
- Keep units from sliding while stacked
- Tamper resistant linking bracket
- In-line barricades won't pull apart
- Units pivot on linking brackets
- Allows for various configurations
- Adjusts to uneven ground
- Panels accept striped sheeting
- Both sides of barricade
- Holes for bolting signs
- Made in the U.S.A.
- Sheeting area is 5.5"H x 51"L
- Dimensions: 74”W x 39.5”H,
- Connected Length is 6'
- Weight: 32 lbs.
- Plastic legs with rubber feet
-
Multi-Purpose Barricade System- ADA Pedestrian Pathway System
- Crowd Control
- Longitudinal Channelizing Device
- Manhole Guard
- Multi-functional barricade system meets ADA requirements
- 72"Lx38"H
- Continuously detectable edge at barricade top and bottom
- Exclusive tripod leg system
- No sandbags needed when using 3 feet
- Anti-trip foot on one side
- Two larger feet on other side
- Use only larger feet with sandbags for ADA Compliance
- Easy handle turn deploys feet
- Unique soft grip handle system
- Quick turn moves feet out or back in
- Four recessed sheeting areas
- Two sheeting areas, 8" x 50", on each side of panel
- Your choice of retroreflective striped sheeting
- Light shelves for standard barricade lights
- 2 per section
- Stack 20% more
- Nesting system allows for 19 units stacked on pallet
- Lowers transportation costs
- Stacking lugs keep units from shifting
- Shape to any layout
- Nesting units pivot 120 degrees
- 3 units in triangle layout for manhole guard
- Robust dual connectors
- Create easy to use linking system
- Smooth, comfortable guard rail
- Rounded edge on top of panel
- Holes for attaching signage
- Use screws to attach 20"W x 14"H sign
- MASH Accepted
- WZ-428
- Meets MUTCD Standards
- Made in the U.S.A.
-
Product Features:- Available in 4', 6' and 8' lengths
- Blow-molded from high density polyethylene, UV stabilized, with reinforced structure
- Wave design strengthens, stiffens centerboard; reduces sagging and warping
- Closed ends prevent dirt and moisture from collecting, prevents bees and hornets from building nests
- Molded-through holes add strength and support, make installations faster
- Retroreflective sheeting meets all state and federal specifications, and is available in Engineer, Hi-Intensity, and Diamond Grades.
- FHWA Acceptance Letter WZ-173, WZ-336 and WZ-244
-
Product Features:- MASH Approved
- NCHRP-350 Certified
- Meets MUTCD Standards
- Rugged heavy-duty design
- Designed for easy nesting and stacking
- Stenciling available
- Recessed and replaceable sheeted panels
- Accepts weight cartridge for additional weight
- Accepts barricade lights
-
Hand Protection A wide and increasing range of Hand Protection styles is available. In order to help cater to every need. Only the best materials and manufacturing methods are used in the production of Portwests' extensive range of Hand Protection products. Portwest A625 Features:- High-visibility liner
- Tested for both cut and heat protection
- PU foam coating for excellent grip in wet and dry conditions
- Smooth PU coating for increased abrasion resistance
- Palm dipped to increase dexterity and ventilation
- 100% breathable seamless liner
- 13 gauge liner for a perfect fit
- CE Certified
- ANSI/ISEA 105 - 2016 CUT Level A4
- EN 388:2016 - 4X43D
- EN 407 X1XXXX
- EN 420
